88
en
DESCRIPTION OF THE VACUUM
CLEANER
1. Multi brush*
2. Bristle-adjustment pedal
3. Deluxe parquet brush*
4. Parquet brush*
5. Upholstery brush*
6. Nozzle for delicate surfaces*
7. Clamp*
8. Precision nozzle*
9. Metal extension lower pipe
10. Pipe lenght regulator
11. Metal extension upper pipe
12. Hose handle
13. Air regulator
14. Remote Power control*
15. Handle grip
16. Plastic exible hose
17. Release
18. Suction inlet
INTRODUCTION
Thank you for purchasing our Multicyclonic
vacuum cleaner. In doing so you have opted
for an effective, high performance appliance.
We advise you to register this product on
www.hotpoint.co.uk to make sure you are
entitled to all the benets made available by
Hotpoint Customer Service.
Multicyclonic vacuum is designed combining efciency
and ergonomy. They new high efciency motors
ensure optimal performances with low consumption.
BEFORE FIRST USE
Assembling (A, B)
1. Fasten the plastic exible hose (16) to the suction
inlet (18) until it clicks into place. To remove it,
press the release (17) and pull it out.
2. Fit the metal extension upper pipe (11) into the
hose handle (12) until it locks into place. Use the
pipe length regulator (10) to adjust the length of
the pipe.
3. Fit the attachment you need (see chapter
“Attachments”) into the end of the metal
extension pipe until it locks into place.
19. Dustbin lid
20. Lower multicyclone
21. Dustbin container
22. Upper multicyclone
23. Dustbin handle
24. Buttons + for electronic power adjustment*
25. Buttons - for electronic power adjustment*
26. Standby button*
27. Battery compartment*
28. Dustbin full indicator*
29. Filter cleaning indicator*
30. Standby indicator*
31. Electronic power regulator*
32. Start/Stop button
33. Start&Pause function*
34. Cord-rewind button
35. Power cord
36. Dustbin release button
37. Multicyclonic lter
38. Hepa 14 lter
39. Air grill
* on some models only
If your appliance is equipped with a Remote Power
Control, you will need to insert the batteries supplied
(27) (see paragraph “Remote Power Control” under
chapter “Features”).
USING THE VACUUM CLEANER
Do not use the vacuum cleaner without lters or dust
container, as the appliance could get damaged.
1. Unwind the power cord (35) and plug the
appliance into an electrical outlet (220/240V).
We suggest to unwind the entire power cord before
start the appliance.
2. Press the start/stop button (32) to start the
appliance.
3. To select the desired suction intensity (based on
the model) use the +/- button and electronically
adjust the power (24, 25) of the Remote Power
Control; or manually push the electronic power
regulator (31).
We suggest to use a low suction power on delicate
surfaces such as curtains, fabrics, cushions etc to
avoid any damage; or at least open the air regulator
(13) to reduce the suction effect.
4. To pause the vacuum cleaner, if this feature is
available, you can use the standby button (26) on
the Remote Power Control or the Start&Pause
function (based on the model). Just insert the
brush into its horizontal housing (33).
(5 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels