Hotpoint FEW14 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Rondelles Hotpoint FEW14. Hotpoint FEW14 User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
INSTRUCTIONS on INSTALLATION & USE for the FIRST EDITION RANGE
FEW14, FEW12, FEW10
Hotpoint recommends, for your own safety and to ensure you get the best possible results from your
Washing Machine, you read through this booklet and follow these steps thoroughly.
Choose a location for your washing
machine where possible on a solid floor,
with the electrical sockets and water
supply tap easily accessible.
Allow sufficient space: 600mm width,
600m depth and 900mm height.
DO NOT install in a bath or shower
room.
Read the rest of these instructions to get the best from your appliance, remember to fill in your guarantee registration.
Keep this Book in a safe place for quick reference.
STEP 1
A wash chart is provided to help you to
select your required programme.
Examples given for the maximum washing load
weight for different fabric types.
STEP 4
WARNING: This appliance must be earthed.
Electrical Guide
Programme Selector Dial
Read through this section to familiarise
yourself with the different
compartments within the dispenser
drawer.
STEP 3
Dispenser Drawer
NOTE: Always follow manufacturer’s dosage
recommendations.
All available optional wash features are
explained within this section - These
allow you to adjust your selected wash
programme to suit your needs.
STEP 6
Options Guide
How to start your selected programme
and how to stop or change the
programme if so required.
STEP 5
Using your Machine
NOTE: Progress indicator lights show what stage in
the programme cycle has been reached.
STEP 8
Troubleshooting
A picture guide provides a clear
explanation how to set a wash
programme.
DO NOT overload the washing machine.
STEP 7
A Typical Wash Programme
NOTE: Hotpoint recommend, on completion of
your programme,that you switch off both the
electricity and water supply to the appliance.
Please refer to the Troubleshooting
section if you have any problems when
using your washing machine.
There may be nothing wrong!
NOTE: In addition to the temperature of the
incoming water, the selection of optional wash
features will affect the programme times.
READ BEFORE
CONTACTING
SERVICE!
Dispose of packaging material in a safe
place and remove any labels.
Please read instructions thoroughly to
ensure you understand each stage
before you begin.
Remember you may be charged for a service call if a
problem with your washing machine is caused by
incorrect installation or misuse.
STEP 2
Installation Guide
Indesit Company UK Limited, Morley Way, Peterborough, PE2 9JB.
Hotpoint guarantee
After Sales Service
“Satisfaction guaranteed or your money back”
We give you a unique satisfaction guaranteed’ promise - valid for 90
days - after you have purchased your Hotpoint appliance.
If there is a technical problem simply call Hotpoint Repair service or
visit our web-site at www.hotpointservice.co.uk and where necessary,
we will arrange for an engineer to call. If the technical problem is not
resolved under this guarantee, we will replace your machine or, if
you prefer, give you your money back.
All Hotpoint appliances carry a fully inclusive 12 month parts and
labour guarantee as well as free replacement parts for the first 5 years
(except microwaves, selected integrated appliances and cooker hoods,
which have a one year guarantee) provided that they are fitted by a
Hotpoint engineer.
Guarantee terms and conditions
Your guarantee is only applicable in the United Kingdom or
Republic of Ireland and is subject to the following provisions
that your appliance:
Has been installed and used correctly in accordance with this
instruction booklet.
Has been used solely for domestic purposes and is located on
domestic premises (ie. not for commercial or trade use).
Has been properly connected to a suitable electrical supply
voltage as stated on the appliance rating plate.
Has not been subject to misuse, accident, modified or repaired by
anyone other than one of our own service engineers.
For pre purchase information on any other Hotpoint
product,
call: 08701 50 60 70 or visit: www
.hotpoint.co.uk
Recycling & Disposal Information
As part of Hotpoint’s continued commitment to helping the environment,
Hotpoint reserves the right to use quality recycled components to keep down
customer costs and minimise material wastage.
Please dispose of packaging and old appliances carefully.
To minimise risk of injury to children, remove the door, plug and cut mains cable
off flush with the appliance. Dispose of these parts separately to ensure that the
appliance can no longer be plugged into a mains socket, and the door cannot be
locked shut.
“No company is better positioned to offer an after sales service on
a Hotpoint appliance than us - the manufacturer”.
As part of our commitment to you, all Hotpoint appliances have the
added benefit of a fully inclusive parts and labour guarantee for the first
12 months. In addition to this you also have the advantage of free
replacement parts for the first 5 years when fitted by a Hotpoint
engineer. When the 12 months parts and labour guarantee expires we
offer the following after sales service options:
Repair Service and Information Help Desk
UK: 08709 066066
www.hotpointservice.co.uk
Republic of Ireland: 1850 302 200
Note: Our operators will require the Model number and the Serial number
of your appliance.
Available 364 days a year with a fast, effective and value for money
service.We have the largest white goods repair service in the UK with over
1100 of our own fully trained engineers. All repairs include a parts and
labour guarantee for 12 months from the date of the repair.
If you require any information or have any questions about your
appliance, our operators are on hand with help and advice.
All this ensures that you will receive the best available after sales service
possible.
Extended Warranties
UK: 08709 088 088
www.hotpoin
tser
vice.co.uk
Republic of Ireland: 1850 502 200
Whether you have just one or a number of Hotpoint appliances in your
kitchen, we offer two service cover plans to give you total peace of mind.
Repair Protection Plan - FREE service repairs for a single Hotpoint
appliance during the period of cover.
Kitchen Cover - FREE service repairs for all your Hotpoint
appliances less than 8 years old.
Genuine Parts and Accessories
UK: 08709 077 077
www.hotpointservice.co.uk
Republic of Ireland: (01) 842 6836
A wide range of genuine parts and accessories are available from our
hotline or through our web site.
Genuine parts and accessories, extended warranties and service
repairs are all available on our web-site at:
www.hotpointservice.co.uk
05/2005 - SIMLEX . Four Ashes, Wolverhampton
195043803.04
Disposal of old electrical appliances
The European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment (WEEE), requires that old household electrical appliances must
not be disposed of in the normal unsorted municipal waste stream. Old
appliances must be collected separately in order to optimise the recovery
and recycling of the materials they contain and reduce the impact on
human health and the environment.
The crossed out “wheeled bin”symbol on the product reminds you of
your obligation, that when you dispose of the appliance it must be
separately collected.
Consumers should contact their local authority or retailer for
information concerning the correct disposal of their old appliance.
Getting to Know your Appliance
Plumbing Indicator Line label
Cold Water inlet point and attached
Fill Hose (Blue connector)
Control Panel
Interlocking door
and release lever
Rating Plate
Mains Cable
Drainage Hose
Hooked End Support
Dispenser Drawer
Front Adjustable Feet
Back Feet
Cleaning the Exterior:
Use a damp cloth or silicon polish to clean the exterior surfaces of the
appliance.
Cleaning the Door Bowl:
Clean the internal surface of the door bowl regularly with a soft cloth.
A build up of soap powder and water hardness residue may result in
water leaking from the door.
Cleaning the Dispenser Drawer & Compartments:
It is advisable to clean the dispenser drawer regularly:
1
Pull the drawer out until it reaches its stop.
2
Press the drawer release latch
down to remove the dispenser
drawer.
4
Relocate the dispenser drawer and push it
firmly back into place.
3
A
B
Clean and dry the
dispenser drawer,
syphons, grate and
fabric conditioner exit
channel (A).
Also,regularly clean the
outlet pipe area (B).
Do not try to clean any
part of the dispenser
drawer while the machine
is working.
WARNINGS:
Do not clean any part of the
machine with abrasive cleaners,
scouring agents, acids, any
bleaches or metal polish, as
they may cause damage.
Key Contacts
After Sales Service
Over 1100 trained specialists, directly employed by us, ensure that you can have complete confidence in both the appliances and
services we offer.
Extended Warranties
UK: 08709 088 088
Monday to Sunday, 8am to 8pm
www.hotpointservice.co.uk
Republic of Ireland: 1850 502 200
Genuine Parts and Accessories
UK: 08709 077 077
Monday to Friday, 8.30am to 5pm
Saturday, 8.30am to 12 noon
www.hotpointservice.co.uk
Republic of Ireland: (01) 842 6836
Repair Service and Information Desk
UK: 08709 066 066
Monday to Friday, 8am to 7.30pm
Saturday, 8.30am to 5.30pm
Sunday, 9.30am to 3.30pm
www.hotpointservice.co.uk
Republic of Ireland: 1850 302 200
Note: Our operators will require the following information:
The Model number (which can be found on
the control panel)
The Serial number (which can be found on the
inner door trim)
Two Transit Fixings (! BOTH must be
removed before you use your machine).
2
CONNECT TO THE COLD
WATER SUPPLY...
The Dispenser Drawer
STEP 3
Electricity Supply Installation
WARNING:
The appliance must be earthed.
CE marking certifies that this appliance conforms to the following
EEC directives:
Low Voltage Equipment - 72/23/EEC & 93/68/EEC
Electromagnetic Compatibility - 89/336/EEC, 92/31/EEC & 93/68/EEC
Fuses
Your appliance comes fitted with a plug and a 13 amp (13A) fuse.If
you need to replace the fuse, use only those rated at 13 amp (13A)
and ASTA approved to BS1362.To change the fuse lift the holder to
vertical position and lift the fuse out. To replace the fuse, insert the
fuse and push fuse holder down into the locked position. Correct
replacement is identified by colour coding or the marking on base of
plug.
WARNING: Do not use the plug unless the fuse holder is in the locked
position and the top cover firmly replaced.
Changing the Mains Lead
If you have damaged the existing lead and need a new one, contact
Hotpoint Service UK on: 08709 066 066 or
www.theservicecentre.co.uk (or in the Republic of Ireland on: 1850
302 200). A charge will be made.
We strongly advise that fitting a new lead is carried out by a qualified
electrician.
Seek professional advice if you need to use an extension lead.
Changing the Plug
If you need to change your plug, if it does not fit your socket: isolate
the machine from the mains supply. Cut off the supplied plug and
safely dispose of the discarded plug. DO NOT plug into any other
socket.
NOTE: If you change the plug, the colour of wires in the mains lead
may not match the colour of the markings which show the different
terminals in the plug.You must wire it as shown below:
Green and yellow (Earth)
wire to terminal marked ‘E’,
symbol , or coloured
green and yellow.
Blue (Neutral) wire to
terminal marked ‘N’ or
coloured black.
13A ASTA approved fuse to
BS1362.
Brown (Live) wire to terminal
marked ‘L or coloured red.
ii
i
Index:
1. Drawer release latch
2. Pre-wash detergent compartment
Maximum 200ml powder or
100ml liquid
3. Main detergent compartment
Maximum 400ml powder or
200ml liquid
4. Grate
5. Fabric conditioner compartment
120ml maximum
1
2
3
4
5
3
DRAINAGE SYSTEM... we recommend one of the following:
4
LEVEL?...
NOTE: ALTHOUGH YOU MAY NEED TO
MOVE THE HOOKED END SUPPORT
ALONG THE GREY DRAINAGE HOSE,
DO NO
T REMOVE IT.
WHICHEVER DRAINAGE METHOD
YOU USE, MAKE SURE THAT THE
HOOKED END SUPPORT IS FIXED
LEVEL TO, OR ABOVE THE ‘PLUMBING
INDICATOR LINE’*
(*see Getting to Know your Appliance)
PLEASE USE THE NEW HOSE SUPPLIED, FITTED
TO THE MACHINE.
Old hoses may
cause leaks due to
worn out washers.
YOUR MACHINE WILL BE NOISY IF THE TWO FRONT FEET ARE NOT
ADJUSTED SO THE MACHINE STANDS FIRM AND LEVEL.
Check the cold
water supply is
running freely...
Connect fill hose (Blue
connector) to the cold
water supply tap.
TURN COLD WATER
SUPPLY TAP ON...
1
REMOVE TWO TRANSIT FIXINGS... Follow these instructions to remove the TWO transit fixings.
IMPORTANT:
Situated, one either
side of the rear panel,
BOTH transit bolts
(complete with
spacers) MUST be
removed before use...
Failure to do so may
cause damage to
your machine!
DO NOT REMOVE!
STANDPIPE METHOD
UNDER SINK METHOD
OR
Attach the GREY
drainage hose to the
under sink drainage
unit securely, using a
hose clip.
Fix the hooked
end support at
a minimum
800mm from
the floor.
cut off the blocked
end of the under sink
drainage unit.
6
READY...
TO CHECK ALL PARTS OF THE INSTALLATION AND TO THOROUGHLY
CLEAN THE INSIDE OF YOUR MACHINE:
RUN PROGRAMME ‘C’ (refer to ‘Programme Selector Dial’, STEP 4).
5
CONNECT TO THE POWER SUPPLY...
PLUG YOUR MACHINE INTO AN ELECTRICAL SOCKET WHICH IS
EASILY ACCESSIBLE. SWITCH ON.
NOTE: Hotpoint recommend
extension leads are not used.
Move your machine into position,
take care not to trap or kink the
hoses.
WITHOUT ANY LAUNDRY
WITHOUT ANY DETERGENT
and
THIS WILL TAKE APPROXIMATELY 2hours 30minutes TO COMPLETE
.............................
Standpipe height:
minimum 500mm
from the floor.
Insert drainage hose
approximately 100mm
into the standpipe.
It is important the transit
bolt and spacer come out
intact (see pic).
! Repeat steps to remove
the second transit bolt.
Unscrew the
bolt using a
13mm spanner.
ST
OP when 3
threads can be
seen.
Hold, slide
sideways and
pull to remove.
For safety,insert
one of the
plastic covers
(supplied with
your machine)
over the hole.
800mm
from floor
Hooked End Support
STEP 1 STEP 2
WARNING:
Do not put any items into
the drawer, other than
detergents designed to be
released from the drawer, as
they may cause damage or
blockage.
TECHNICAL DETAILS
Models
Dimensions
Capacity
Electric
Connections
Spin Speed
Control
programmes
according to
IEC456
directive
FEW14
FEW12
FEW10
59.5cm wide
85cm high
60cm deep
from 1 to 5.5kg
voltage 220/240 Volts 50Hz
maximum absorbed power:
1700W-2100W
up to 1400rpm - FEW14
up to 1200rpm - FEW12
up to 1000rpm - FEW10
programme D
temperature 60˚C
run with a 5.5kg load
When adjusting the feet, use a spirit level to check the machine stands level...from
side to side and from front to back.
- Move your machine into its final location
(take care not to trap or kink the hoses.
- Turn one or both front feet anti-clockwise by
hand, until the feet cannot be turned any more.
- The spring on each foot will stop them coming
loose.
If it is placed on a fitted carpet, adjust the feet to ensure that there is adequate
ventilation beneath the washing machine.
Adding Fabric Conditioner
Dispensing Powder Detergent
Dispensing Liquid Detergent
To achieve the best wash results the manufacturers
recommended amount of detergent should be measured
and added to the main detergent compartment (II symbol)
(max. 400ml).
Pour the recommended amount of fabric conditioner into the
compartment (flower symbol).
Do not exceed the maximum fill line.
Pre-wash Programmes A and B
When selecting programmes A or B add detergent to both the pre-wash
compartment (I symbol) and the main wash compartment (II symbol).
DO NOT use in drum dosing devices with Pre-wash programmes A and B.
We recommend the use of a detergent dosing ball, as provided by your
detergent manufacturer.
Vue de la page 0
1 2

Résumé du contenu

Page 1 - STEP 1 STEP 2

INSTRUCTIONS on INSTALLATION & USE for the FIRST EDITION RANGEFEW14, FEW12, FEW10Hotpoint recommends, for your own safety and to ensure you get th

Page 2

Using your MachineSTEP 5On-Off / Selecting a programme...To pause a programme...NOTE:Progress indicator lights...OFF positionProgramme Active indicato

Commentaires sur ces manuels

Pas de commentaire