Hotpoint AQ113D 697 I UK Mode d'emploi Page 9

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 16
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 8
EN
99
Wash options
Steam Hygiene
This option enhances washing performance by generating
steam during the wash cycle that eliminates any bacteria
from fibres while treating them at the same time. Place the
laundry in the drum, choose a compatible programme and
select option “ “.
! The steam generated during washing machine operation
may cause the porthole door to become hazy.
! It cannot be used in conjunction with , , , , ,
, , , , .
Easy Iron
By selecting this option, the wash and spin cycles will be
modified in order to reduce the formation of creases.
At the end of the cycle the washing machine drum will
rotate slowly; the “Easy Iron” and START/PAUSE indicator
lights will flash. To end the cycle press the START/PAUSE
button or the “Easy Iron” button.
! It cannot be used in conjunction with , , , , , .
Time Saver
If you select this option, the wash cycle duration will be
reduced by up to 50%, depending on the selected cycle,
thereby guaranteeing simultaneous water and energy
saving. Use this cycle for lightly soiled garments.
! It cannot be used in conjunction with , , , ,
, , , , .
Eco
The Eco Option saves energy by not heating the water
used to wash your laundry – an advantage both to the
environment and to your energy bill. Instead, intensified
wash action and water optimisation ensure great wash
results in the same average time of a standard cycle.
For the best washing results we recommend the usage of a
liquid detergent.
! It cannot be used in conjunction with , , , , ,
, , , , .
(*) Note: 10 minutes after the START, the machine will recalculate the time remaining until the end of the wash cycle on the basis of the load inside it; this
value will then be shown on the display.
Wash cycles and options
Table of wash cycles
For all Test Institutes:
1) Test wash cycle in compliance with regulation 2010/1061: set wash cycle with a temperature of 60°C.
2) Test wash cycle in compliance with regulation 2010/1061: set wash cycle with a temperature of 40°C.
3) Long wash cycle for cottons: set wash cycle with a temperature of 40°C.
4) Short wash cycle for cottons: set wash cycle with a temperature of 40°C.
5) Long wash cycle for synthetics: set wash cycle with a temperature of 40°C.
Icon Description of the wash cycle
Max. temp.
(°C)
Max.
speed
(rpm)
Detergent and addi-
tives
Max. load (kg)
Cycle
duration
Detergent
for wash
Fabric
softener
Normal Eco
Cotton Coloureds (2-3): lightly soiled whites and delicate colours. 40° 1600
11 11
Synthetics Resistant 60° 800
5 3,5
Synthetics Resistant (5) 40° 800
5 3,5
Whites
60° 1600
6 -
Coloureds (4)
40° 1600
6 6
Darks
30° 800
6 -
** Steam Refresh (see next page). - - - - 2 -
Duvets: for down-stuffed garments. 30° 1200
3,5 -
Bed&Bath for bedlinen and towels. 60° 1600
11 -
Rinse
- 1600 -
11 -
Spin and Pump out - 1600 - - 11 -
Anti Allergy
60° 1600
6 -
Ultradelicates
30° 0
1 -
Wool: for wool, cashmere, etc. 40° 800
2,5 -
Mix 30': to refresh lightly soiled garments quickly (not suitable for
wool, silk and clothes which require washing by hand).
30° 800
4 3,5
Cotton Whites: extremely soiled whites. 90° 1600
11 11
Cotton Whites (1): heavily soiled whites and resistant colours. 60° 1600
11 11
(*) The duration of the wash cycles can be checked on the display.
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary
according to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options
selected.
Vue de la page 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire