Hotpoint AQ9L 29 U (UK) /v Mode d'emploi télécharger pdf (Page 8)

WARNING: before you use the washing machine for

the first time, run a wash cycle with detergent and no

laundry, using the 90° cottons cycle without pre-wash.

1. SWITCH THE MACHINE ON. Press the

button.

All the indicator lights will illuminate for 1 second; the

indicator light corresponding to the

button will then

remain lit in a fixed manner and the START/PAUSE

indicator light will flash slowly.

2. LOAD THE LAUNDRY. Open the porthole door.

Load the laundry, making sure you do not exceed the

maximum load value indicated in the table of wash

cycles on the following page.

3. MEASURE OUT THE DETERGENT. Pull out the

detergent dispenser drawer and pour the detergent

into the relevant compartments as described in

Description of the machine.

4. CLOSE THE PORTHOLE DOOR.

5. SELECT THE PROGRAMME. Turn the WASH

CYCLE SELECTOR KNOB right or left, until you have

selected the desired wash cycle. A temperature and

spin speed is set for each wash cycle; these may be

adjusted.

6. CUSTOMISE THE WASH CYCLE. Use the

relevant buttons on the control panel:

Modify the temperature and/or spin speed.

The machine automatically displays the maximum

temperature and spin speed values set for the

selected cycle, or the most recently-used settings if

they are compatible with the selected cycle. The

temperature can be decreased by pressing the

button, until the cold wash ( ) setting is reached. The

spin speed may be progressively reduced by pressing

the

button, until it is completely excluded ( ). If

these buttons are pressed again, the maximum

values are restored.

 Exception: if the Cotton programme is selected, the

temperature can be increased up to a value of 90°C.

Set a Delay Timer.

To set the "delayed start" option for the program you

have selected, press the button until the indicator light

for the desired delay time is illuminated.

On pressing the button six times, this function will

deactivate.

 Once the START/PAUSE button has been pressed,

the time delay may only be decreased.

Modify the cycle settings.

Press the OPTION buttons to customise the wash

cycle in accordance with your own requirements.

 Press the button to activate the option; the

corresponding indicator light will switch on.

 Press the button again to disable the option; the

indicator light will switch off.

 If the selected option is not compatible with the

selected wash cycle, this incompatibility will be

signalled by the flashing of the indicator light and a

sound alert (3 beeps); the option will not be activated.

 If the selected option is not compatible with another

option that has been selected previously, the indicator

light corresponding to the first option selected will flash

and only the second option will be activated; the

indicator light corresponding to the button will remain

lit in a constant manner.

7. START THE PROGRAMME. Press the START/

PAUSE button. The corresponding indicator light

remains lit in a fixed manner and the porthole door

locks (the

DOOR LOCKED indicator light

illuminates). The icons corresponding to the wash

cycle phases will light up during the cycle to indicate

which phase is currently in progress. To change a

wash cycle once it has already started, pause the

washing machine by pressing the START/PAUSE

button; then select the desired cycle and press the

START/PAUSE button again. To open the door during

a wash cycle, press the START/PAUSE button; if the

DOOR LOCKED

indicator light is switched off you

may open the door. Press the START/PAUSE button

again to restart the wash cycle from the point at

which it was interrupted.

8. THE END OF THE WASH CYCLE. This is indicated

by the illuminated text END. The porthole door may be

opened immediately. If the START/PAUSE indicator light

is flashing, press the button to end the cycle. Open the

door, unload the laundry and switch off the machine.

 If you wish to cancel a cycle which has already begun,

press and hold the

button until the cycle stops and

the machine switches off.

Bag for quilts, curtains and delicate garments

The Aqualtis washing machine makes it easier for you to

wash even the most valuable and delicate garments in

complete confidence thanks to the special bag which

protects the laundry (this is supplied with the machine).

We recommend that the bag is used every time you

wash quilts and padded items with an outer layer made

using synthetic material.

* Steam Refresh

This programme refreshes garments by removing bad

odours and relaxing the fibres. Insert dry items only (that

are not dirty) and select programme "

". At the end of

the cycle, clothes will be slightly damp. Depending on

the type of fabric being refreshed, garments may be

worn after 10 minutes (or once they have dried

sufficiently). The "

" programme makes ironing easier.

Moreover, with the "Steam Perfume" laundry balls, your

favourite perfume can be added to your laundry. Place a

few drops of perfume on the sponge contained inside

the laundry ball, close it and insert it into the drum

together with the laundry. Then launch the specific

programme "

". At the end of the cycle, garments will

be relaxed and fragrant.

 Not recommended for wool or silk garments.

 Do not add too much perfume to the sponge in order

to avoid it dripping.

 Do not add softeners or detergents.

Running a wash cycle

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Hotpoint AQ9L 29 U (UK) /v Mode d'emploi Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Machines à laver Hotpoint AQ9L 29 U (UK) /v