Hotpoint ITWD 61252 G (PL) Mode d'emploi télécharger pdf (Page 6)

EN 4

Do not use extension leads or multi sockets.

Electrical connections must be made in accordance with local regulations.

1) Warning - this washing machine must be earthed

This washing machine is normally supplied with a mains lead having a plug ﬁtted in the factory which has

been checked for correct earth continuity.

If the ﬁtted plug is not suitable for your socket outlet, or if the machine’s mains lead is not ﬁtted with a plug,

you should ﬁt a suitable new, good quality plug by following the instructions in (2) below.

Any unsuitable plug should be cut off and disposed of in order to avoid a possible shock hazard should it be

inserted into a socket.

2) CONNECTION TO A REWIRABLE PLUG - to be carried out only by a qualiﬁed electrician

The wires in the mains lead are coloured in accordance with the following code:

BLUE - “NEUTRAL” (“N”)

BROWN - “LIVE” (“L”)

GREEN AND YELLOW - “EARTH” (“E”)

To ﬁt a new plug, proceed as follows:

2.1)Polarized Plugs (e.g. 3 pin, 13 amp plug conforming to BS

1363A)

a. The GREEN AND YELLOW wire must be connected to the terminal

in the plug which is marked with the letter “E” or by the Earth symbol

or coloured green and yellow.

b. The BLUE wire must be connected to the terminal which is marked

with the letter “N” or coloured blue.

c. The BROWN wire must be connected to the terminal which is

marked with the letter “L” or coloured brown.

2.2) Non-polarized plugs (e.g. 2 pin with side earth contact)

The wire which is coloured GREEN AND YELLOW must be connected to the earth contact. The other two

wires should be connected to the two pins, irrespective of colour.

FUSE REPLACEMENT

If the mains lead of this washing machine is ﬁtted with a BS 1363A 13

amp fused plug, replace the fuse only with an A.S.T.A. approved type con-

forming to BS 1362 and proceed as follows: Remove the fuse cover (A)

and the fuse (B). Fit the replacement 13 A fuse into the fuse cover. Reﬁt

both into the plug. For all other types of plug, the supply socket should be

protected by a 16 A fuse or circuit breaker at the distribution board.

ELECTRICAL CONNECTION

1 2 3 4 5 6 7 8 9 10 11 ... 35 36

Pas de commentaire

Hotpoint ITWD 61252 G (PL) Mode d'emploi Page 6