![](/jointfilesconvert/807755/bg1.png)
GB
Quick Guide
THANK YOU FOR PURCHASING A HOTPOINT PRODUCT.
To receive more comprehensive assistance, register the
appliance on
www.hotpoint.eu/register
Before using the appliance carefully read the Health and Safety guide.
Before using the machine, it is imperative that the transport bolts are removed. For more
detailed instructions on how to remove them, see the Installation Guide.
CONTROL PANEL
WASH CYCLE TABLE
For all testing institutes:
2) Long cotton cycle: set wash cycle 3 with a temperature of 40°C.
3) Long synthetics cycle: set wash cycle 4 with a temperature of 40°C.
* By selecting the 14 cycle and excluding the spin cycle, the washing machine will drain only.
** The duration of the wash cycles can be checked on the display.
*** For Prewash press the “Temp.” button until the symbol lights up (only 90°).
The cycle duration indicated on the display or instruction manual is an estimate based on
standard conditions. The actual duration may vary in relation to several factors, such as
the temperature and pressure of the incoming water, ambient temperature, amount of
detergent, load quantity and type, load balancing and any additional options selected.
1) Test wash cycle in compliance with regulation 1061/2010:
This cycle is designed for normally soiled cotton loads and is the most ecient in terms of
both electricity and water consumption; it should be used for garments washable at 60°C or
at 40°C. The actual washing temperature may dier from the indicated value.
PRODUCT DESCRIPTION
1.
3.
2.
5.
4.
7.
6.
8.
1. Top
2. Detergent dispenser drawer
3. Control panel
4. Handle
5. Porthole door
6. Drain pump (behind the plinth)
7. Plinth (removable)
8. Adjustable feet (2)
Maximum load 9 kg
Power input in o mode 0.5 W / in left-on mode 8 W
Active
Care
(
)
Add
Gar-
ments
(
)
Detergents and
Additives
Recommended
detergent
Residual damp-
ness %
Energy consump-
tion kWh
Total water l
Wash cycle
Temperature
Max.
spin speed
(rpm)
Max.
load
(kg)
Duration
(min-
utes)
Pre-
wash
Wash
Fabric
softener
Powder Liquid
Default Range 1 2 3
1 Mixed
40°C - 40°C
1600 9
**
–
–
– – –
2
Eco Cotton
(1)
60°C
60°C 1600 9 250
–
–
53 1,03 57,5
40°C 1600 9 235
–
–
53 1,24 94
3 Cotton (2)
40°C - 60°C
1600 9 235
–
–
53 1,24 94
4 Synthetics (3)
40°C - 60°C
1200 4,5 175
–
–
53 0,54 55
5 Delicates
40°C - 40°C
1000 4,5
**
–
–
– – –
6
Wool
40°C - 40°C
800 2
** –
–
–
– – –
7 Anti Allergy
60°C - 60°C
1600 5
** –
–
– – –
8 Anti Stain 40°
40°C - 40°C
1000 4,5
**
–
–
– – –
9 White
40°C - 90°C
1600 9
**
(***)
– – –
10 Steam Refresh
– – – 2 ** – – – – – – – – – –
11 Rapid 30 min
30°C - 30°C
800 4,5
**
–
–
– – –
12 Bed & Bath
60°C - 60°C
1600 9
**
–
– – –
13 Shirts
40°C - 40°C
600 2
** –
–
–
– – –
14 Spin & Drain *
– –
1600 9
** – – – – – – – – – –
15 Rinse & Spin
– –
1600 9
** – – – –
– – – – –
Required dosage Optional dosage
DETERGENT DISPENSER DRAWER
compartment 1: Pre-wash detergent
(powder)
compartment 2: Detergent for the wash
cycle (powder or liquid)
If liquid detergent is used, it is recommended
that the removable plastic partition A
(supplied) be used for proper dosage.
If powder detergent is used, place the partition
into slot B.
compartment 3: Additives (fabric softeners,
etc.)
The fabric softener should not overow the grid.
! Use powder detergent for white cotton garments, for pre-washing, and
for washing at temperatures over 60°C.
! Follow the instructions given on the detergent packaging.
1. STEAM HYGIENE / MUTE button
2. FINAL CARE / KEY LOCK button
3. ON/OFF button
4. ACTIVE CARE button and indicator light
5. START/PAUSE button
6. RAPID / ECO button
7. SPIN button
8. START DELAY button
9. TEMPERATURE button
10. WASH CYCLE SELECTOR KNOB
11. Programme Key
1 2
4
5
67
8
9
3
10
DISPLAY
11
Commentaires sur ces manuels