Hotpoint ARC 229 Mode d'emploi télécharger pdf (Page 7)

Preparing the appliance for use

Switching on the appliance

Insert the plug to start the appliance and then set the temperature on the front panel. A green pilot light

comes on to indicate that the appliance is switched on.

The product has an internal light that does not come on automatically when the door is opened, but can

be switched on as necessary from the control panel by pressing the relevant button.

Setting the temperature

For the appliance to work correctly we recommend setting the temperature according to the indications

given in the “Introduction to wine” section.

Note:

The room temperature, the door opening frequency and the position of the appliance can influence the

internal temperatures.

Description of the control panel

a) ON/OFF button: appliance on/off

b) appliance operating pilot light

c) (+) button to increase the temperature (max +18°C)

d) (-) button to decrease the temperature (min +6°C)

e) cooling activated pilot light

h) heating activated pilot light

g) temperature in inner compartment display

h) inside light button

i) inside light pilot light

Cellar working with double or single temperature zone

The cellar is designed to work with two temperature zones or, as an alternative if the customer so

requires, with a single temperature zone. For two-temperature operation position the black bottle-holder

rack on the rails of the fourth shelf (starting from the first at the top), then set the temperature required

in the upper zone, remembering that once the required temperature is reached the temperature of the

lower compartment will be about 6 degrees centigrade higher than that set (the temperature of the lower

zone cannot be set separately).

Note:

To store the wine correctly we recommend setting the thermostat temperature at 10°C (upper

compartment) to obtain a temperature of 15 – 16°C. For working with one temperature zone the black

bottle-holder rack is removed and replaced with the accessory rack (the same type as the other wood-

colour racks already installed). Keep the unused rack in a dry and cool place to avoid it being damaged by

humidity or other atmospheric agents and thus being unusable in the future.

abei

HOW TO OPERATE THE APPLIANCE

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Pas de commentaire

Hotpoint ARC 229 Mode d'emploi Page 7