Hotpoint HD90X Manuel d'utilisateur télécharger pdf (Page 6)

6GB

Upper exhaust flue

• Slightly widen the two sides of the upper flue

and hook them behind the brackets 7.2.1, making

sure that they are well seated.

• Secure the sides to the brackets using the 4

screws 12e (2,9 x 9,5) supplied.

Lower exhaust flue

• Slightly widen the two sides of the flue and

hook

them between the upper flue and the wall,

making sure that they are well seated.

• Fix the lower part laterally to the hood body

using the 2 screws 12e (2,9 x 9,5) supplied.

Connections

DUCTED VERSION AIR EXHAUST SYSTEM

When installing the ducted version, connect the hood to the chimney using either a flexible or rigid

pipe ø 150 or 120 mm, the choice of which is left to the installer.

• To install a ø 120 mm air exhaust connection,

insert the reducer flange 9 on the hood body

outlet.

• Fix the pipe in position using sufficient pipe

clamps (not supplied).

• Remove any activated charcoal filters.

RECIRCULATION VERSION AIR OUTLET

• Push the connection 15 onto the air outlet.

• Insert the connection extension pieces laterally

14.1 in connection 15.

• Fix the connection extension 14.1 to the

connection 15 using the 4 screws 12b (3,5)

supplied.

• Ensure that the activated charcoal filters have

been inserted.

ø 120ø 150

14.1

12b

Flue assembly

2.1

2.2

12e

7.2.1

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Hotpoint HD90X Manuel d'utilisateur Page 6