Hotpoint HDA2600K Manuel d'utilisateur télécharger pdf (Page 22)

How to change color panels

If you are redecorating, you can

change your dishwasher’s front

panels to match or blend with your

new colors.

The panels are held in place by the

door trim and the trim on the panel

below the door. Each side of each

panel is a different color. Or you

can paint a panel with the color of

your own choice.

How to change door panel inserts:

1.

Take out three trim screws on

either side of the dishwasher door.

Remove the side trim.

2. Slide out both insert panels

together.

3. Put the color you want in front.

(Careful–edges may be sharp.)

4. Replace insert panels, side trim

and screws.

How to change lower panel inserts:

1.

Remove four panel attachment

screws. (Two above the panel, two

below the panel.)

2. Remove the entire panel.

3. Take out three screws and

remove the top trim.

4. Slide out both insert panels

together.

5. Put the color you want in front.

6. Replace insert panels, top trim

and screws.

7. Replace the entire panel and four

attachment screws.

Color insert panels for both door

and panel can be replaced by 1/4”

thick wood inserts to match your

kitchen cabinets. Get them from your

nearest cabinet or lumber dealer.

22

Dimensions for 1/4” wood inserts:

Door Panel:

19%”

H X

23X(’

W.

Lower Panel:

3]fiJ’

H x

23~~’

W.

Note: Do not operate dishwasher

while changing panels or when

lower access panel is removed.

Change color in minutes. Just

remove trim and change.

1 2 ... 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire