Hotpoint HDA797K Manuel d'utilisateur télécharger pdf (Page 12)

Questions?

—

---- Use This fioblem Solver

PROBLEM

POSSIBLE CAUSE AND REMEDY

DISHWASHER

A fuse in your home maybe blown, or the circuit breaker tripped. Replace fuse or reset

WON’T RUN circuit breaker. Remove any other appliances from the circuit.

UNUSUAL NOISE

Utensils may not be secure on rack pins. Or something small may have dropped from

the rack. Water is causing utensils to rattle. Make sure everything is securely placed

in dishwasher.

DISHES DON’T DRY

Make sure inlet water temperature is correct. (See page 6.)

Unload the bottom rack first. Water from dishes in the top rack maybe spilling into the

bottom rack.

Check for improper loading. Dishes shouldn’t nest together. Avoid overloading.

UNCLEAN DISHES

Check inlet water temperature. It should be at least

120°F.

(To test, seepage 6.)

AND FLATWARE

To obtain the benefits of a complete cycle, be careful that you

do not turn the dial any

further than necessary

to start the dishwasher.

Water pressure may be temporarily low. Turn on a faucet. Is water coming out slower than

usual? If so, wait until pressure is normal before using your dishwasher.

PluWed air gap. (See page 11.)

Improper rack loading. (See pages 8-9.)

BLACK OR GRAY Aluminum deposits often leave marks when they rub against other things. Remove marks

MARKS ON DISHES

with a mild abrasive cleanser.

DETERGENT LEFT

Water may not be reaching the detergent cups. Move dishes that maybe blocking

IN DISPENSER CUPS

detergent cup.

The dispenser cover may not be opening or may be blocked by improperly loaded items.

If you used a powder detergent, open the cup and remove any caked-on detergent. If the

cup still doesn’t open automatically, call for service.

Detergent may be old. If the powder detergent is hard or caked in the box, throw it away.

The detergent may not be working well. Try another brand.

1 2 ... 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Hotpoint HDA797K Manuel d'utilisateur Page 12