Hotpoint LFT 321 HX UK Mode d'emploi télécharger pdf (Page 7)

Loading the racks

Before loading the racks, remove all food residues from the

crockery and empty liquids from glasses and cups.

After loading the appliance, check that the sprayer arms

can rotate freely.

Lower rack

The lower rack can hold pans, lids, plates, salad bowls, cutlery,

etc. as seen in the Loading examples.

Plates and large covers should be placed at the sides of the

rack, ensuring that they do not block the rotation of the upper

sprayer arm.

Some dishwasher models are fitted with tip-up sections, which

can be used in a vertical position when arranging plates or in a

horizontal position when arranging pans and salad bowls.

Cutlery basket

The type of cutlery basket may vary according to the

dishwasher model: it may be modular, non-modular or a sliding

version. The non-modular basket must only be positioned at the

front of the lower rack.

The modular basket may be separated into two parts, a solution

which is recommended when performing a half load wash (only

in models offering this option), is available in a sliding version

(positioned at any point on the lower rack by sliding it between

the fixed or tip-up inserts.

- Both versions are fitted with a collapsible sliding system which

means the cutlery can be arranged in the best possible way.

Knives and other utensils with sharp edges must be placed

in the cutlery basket with the points facing downwards, or they

must be positioned horizontally in the tip-up compartments on

the upper rack.

Cutlery basket positioning examples

Upper rack

Load this rack with delicate and lightweight crockery: glasses,

tea and coffee cups, saucers, small salad bowls, saucepans

and small saucepans which are not too soiled, using the

Loading examples as a guide.

 Mugs and cups: place these on the tip-up compartments**.

 Long sharp knives and serving utensils: place these on the

tip-up compartments**.

Adjusting the height of the upper rack

In order to make it easier to arrange the crockery, the upper

rack may be moved to a higher or lower level. (in models

which offer the Baby cycle, the upper rack must be placed in

its lower position when the appliance is being loaded).

The height of the upper rack should ideally be

adjusted WHEN THE RACK IS EMPTY.

Never lift or lower the rack on one side only.

Open the left and right guide rail stops

and pull out the rack; position it higher

or lower as required, slide it along the

guide rails until the front wheels are in

place and close the stops (see

figure).

If the rack is fitted with DualSpace

handles* (see figure), pull out the

upper rack until it reaches its stop

point, grip the handles at the sides of

the rack and move it upwards or

downwards, then slowly let it fall back

into place.

Loading examples for the upper rack

Loading examples for the lower rack

Baby Tip-up compartments

For dishwasher models with a Baby

Cycle, tip-up compartments suitable

for washing bottles, rings and teats

are provided. (see the instruction

sheet)

Items which should not be washed in the

dishwasher

 Wooden items, objects with wooden or horn handles or

glued-on parts.

 Items made from aluminium, copper, brass, pewter or tin.

 Items made from plastic material which is not heat-

resistant.

 Antique or hand-painted porcelain.

 Antique silver. Silver which is not antique may, however,

be washed in the dishwasher using a delicate wash cycle,

provided that it does not come into contact with other

metals.

We recommend the use of crockery which is dishwasher

safe.

* Only available in selected models.

** The number and position may vary.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

Hotpoint LFT 321 HX UK Mode d'emploi Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Lave-vaisselle Hotpoint LFT 321 HX UK