Hotpoint LTF 11M121 C UK Mode d'emploi télécharger pdf (Page 13)

Special wash cycles and Options

Wash options

If an option is not compatible with the selected wash cycle

(see table of wash cycles), the corresponding LED flashes

rapidly 3 times and beeps will sound.

Delayed start

The start of the wash cycle may be delayed for a period

of time between 1 and 12 hours.

1.PresstheDELAYEDSTARTbutton:thecorrespondingsymbol

appears on the display; each time you press the button, the time

(1h,2h,etc.uptomax.12h)fromthestartoftheselectedwash

cycle will be increased.

2. Select the cycle and close the door: the timer will begin

counting down;

3.Oncethistimehaselapsed,theindicatorlightswitchesoff

and the wash cycle begins.

To adjust the delay time and select a smaller period of time,

press the DELAYED START button. To cancel it, press the

button repeatedly until the selected delayed start indicator light

switches off. The wash cycle will start automatically as soon as

the door is shut.

Multi-functional tablets

This option optimises washing and drying results.

When using multi-functional tablets, press the MULTI-

FUNCTIONAL TABLETS button, the indicator light will

illuminate. The “Multi-functional tablets” option results in

the lengthening of the wash cycle.

The use of tablets is only recommended when the

MULTI-FUNCTIONAL TABLETS option is available.

This option is not recommended for use with wash

cycles which do not specify the use of multi-functional

tablets.

Zone Wash

This option makes it possible to carry out the wash

cycle in the selected rack only. Select the wash cycle and then

presstheZONEWASHbutton:theselectedracklightsupand

the wash cycle starts in the selected rack only. Press the button

again to deselect the option.

The option is available with the following wash cycles: Intensive

and Normal.

Select the option and the Intensive cycle to start the

ULTRAINTENSIVE ZONE washing. This wash cycle is ideal

for very soiled mixed loads, e.g. pans and saucepans, dishes

with heavy encrustation or difficult-to-clean crockery (grater,

vegetable mill, dirty cutlery). The spraying pressure is stronger

and the washing temperature higher, thus ensuring optimum

handling of stubborn stains.

Select the option and the Normal cycle to start the SAVING

ZONEwashing.Thisfunctionmakesitpossibletoreduceenergy

consumption.Cycledurationmightchange.

Remember to load the crockery in the selected rack only

*Onlyavailableinselectedmodels.

Notes:

Optimumperformancelevelswhenusingthe“Fastwash”

and“Express30’”cyclescanbeachievedbyrespecting

the specified number of place settings.

To reduce consumption even further, only run the dishwasher

when it is full.

Note for Test Laboratories: for information on comparative

ENtestingconditions,pleasesendanemailtothefollowing

address:[email protected]

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire

Hotpoint LTF 11M121 C UK Mode d'emploi Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Lave-vaisselle Hotpoint LTF 11M121 C UK