Hotpoint SDD910P Mode d'emploi Page 9

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 20
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 8
9
EN
Wash options
The OPTIONS may only be set, modified or reset after
the wash cycle has been selected and before the
Start/Pause button has been pressed.
Only the options which are compatible with the type of
wash cycle set may be selected. If an option is not com-
patible with the selected was cycle (see Table of wash
cycles), the corresponding LED flashes rapidly 3 times.
If an option is selected which is incompatible with another
option or wash cycle selected previously, the incompat-
ible option light will flash 3 times and switches off, while
the most recently selected setting remains lit.
To deselect an option which has been set by mis-
take, press the corresponding button again.
Delayed start
The start of the wash cycle may be delayed for a period
of time between 1 and 24 hours.
1. After selecting the desired wash cycle and any other
options, press the DELAYED START button: the
corresponding indicator light will illuminate. Use the
same button to select the time at which you wish the
wash cycle to begin (after a period of 1 to 24 hours).
2. Confirm your selection using the Start/Pause button;
the countdown will begin. The selected delay period
indicator light is displayed and the Start/Pause button
stops flashing (the light becomes fixed instead).
3. When the set time has elapsed, a long beep sounds,
the DELAYED START indicator light switches off and the
wash cycle begins.
To deselect the DLEAYED START option, press the
DELAYED START button repeatedly until the text OFF
appears.
The Delayed Start function cannot be set once the
wash has been started.
Half load
If there are not many dishes to be washed, a half load
cycle may be used in order to save water, electricity and
detergent. Select the wash cycle and press the HALF
LOAD button: the indicator light will illuminate.
Remember to halve the amount of detergent.
It is better to use powder detergent in this case.
This option is incompatible with the following wash
cycle: Rapide wash.
Multi-functional tablets (Tabs)
This option optimises washing and drying results.
When using multi-functional tablets, press the MULTI-
FUNCTIONAL TABLETS button. The corresponding indicator
light will illuminate. The Multi-functional tablets option results
in the lengthening of the wash cycle.
The MULTI-FUNCTIONAL TABLETS option remains
set for subsequent wash cycles if it is not deselected.
The use of tablets is only recommended for
models which offer the MULTI-FUNCTIONAL TABLETS
option.
This option is not recommended for use with wash
cycles which do not specify the use of multi-functional
tablets
(see Table of options).
This option is incompatible with the following wash
cycle: Soak.
A B C
Table of options
Delayed
Start
Half
Load
Tabs
1. Intensive
Yes
Yes
Yes
2. Auto Normal
Yes
Yes
Yes
3. Prewash
Yes
Yes
No
4. Eco
Yes
Yes
Yes
5. Speed 25’
Yes
No
Yes
6. Delicate
Yes
Yes
Yes
7. Short Time
Yes
No
Yes
8. Good Night
Yes
No
Yes
Vue de la page 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Commentaires sur ces manuels

Pas de commentaire