Hotpoint SDS 1711 (TK)/HA Mode d'emploi télécharger pdf (Page 13)

Stability bracket

WARNING: To prevent the fridge from tilting forwards,

it must be held in place with the stability bracket

supplied.

This is the responsibility of the customer.

Fixed to the floor or wall at the rear of the fridge, the

stability bracket hooks onto the compressor mounting

plate holding the fridge secure.

The stability bracket must be installed securely in

accordance with these instructions BEFORE using

the fridge.

Note: The fridge is heavy so care must be taken

when moving it.

1. Position the fridge in its chosen location.

2. Looking from the front of the fridge, mark the

position of the left hand panel.

3. Move the fridge far enough away to get clear

access to the back wall.

4. In order to clear components on the compressor

mounting plate, the stability bracket must be

positioned on the floor between 100 - 200mm to the

right of the left hand panel mark.

5. Mark and drill the fixing holes and insert suitable

fixings to hold the bracket firm.

6. Carefully re-position the fridge. Make sure that the

compressor mounting plate locates into the stability

bracket.

Position stability racket

100 - 200mm away from left

hand panel mark.

Position of left

hand panel

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Hotpoint SDS 1711 (TK)/HA Mode d'emploi Page 13