EN10
FLEXI.
This function is used in case of big pots that the single zone can not satised, ex, sh, big pot for meat.
In order to active the FLEXI/CONNEXTION ZONE, please press on + and - buttons simultaneously as shown
in the picture below.
“Power management” (Function where it is available).
Thanks to the “Power management” function, the user can set the maximum power the hob can reach, as required.
This setting is possible at any time and is maintained until the next change.
By setting the required maximum power, the hob automatically adjusts distribution in the various cooking zones, ensuring that this limit is never exceeded; with the
advantage of also being able to manage all the zones simultaneously, but without overload problems.
4 maximum power levels are available and showed on display: 2.5 – 4.0 – 6.0 – 7.2 kW (7.2 kW is considered as max power of cooktop).
At the time of purchase, the hob is set to maximum power.
After plugging the appliance into the electrical socket, in the rst 60 seconds it is possible to set the required power level by running the following points:
Step Control panel Display
1
Press for approximately 3 seconds both Power management
button (step 1).
2
Press the Power Management button (step 2) to conrm the
previous step.
The display shows .
3
Press to set the chosen level amongst the different options
available.
The light comes on together with the in-use lights for the
individual cooking zones.
4
Press the Power Management button (step 4) to conrm the
previous step.
The display shows the set level which ashes for approximately
2 seconds; after which the hob emits an acoustic signal and
then turns itself off; it is now ready for use.
In case of an error when setting the power, the symbol appears in the middle and an acoustic signal sounds for about 5 seconds. In this case repeat the
conguration procedure from the beginning. If the error occurs again, contact the After-Sales Service.
During normal use, if the user tries to increase the maximum available power level when reached, the level of the zone in use ashes twice and an acoustic signal sounds.
To obtain a higher power in that zone, it is necessary to manually decrease the power level of one or more already active cooking zones.
Activation/deactivation of the acoustic signal.
After switching the hob on, press and hold the “+” button and the outermost button on the right simultaneously for at least three seconds (“control panel lock”).
5 Sec
CLEANING
WARNING
• Do not use steam cleaners.
• Before cleaning, make sure the cooking zones are switched off and that the residual heat indicator (“H”) is not displayed.
IMPORTANT: Do not use abrasive sponges or scouring pads. Their use could eventually ruin the glass.
• After each use, clean the hob (when it is cool) to remove any deposits and stains due to food residuals.
• Sugar or foods with a high sugar content damage the hob and must be immediately removed.
• Salt, sugar and sand could scratch the glass surface.
• Use a soft cloth, absorbent kitchen paper or a specic hob cleaner (follow the Manufacturer’s instructions).
• Liquid spillages on the cooking zones may make pans vibrate or move.
(13 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels