Hotpoint MP 996 IX H Guide d'utilisation et d'entretien télécharger pdf (Page 27)

Any problems or malfunctions that may occur can often be easily resolved.

Before contacting the After-sales Service, check the following table to see whether you can resolve the

problem yourself.

If the problem persists, contact your nearest After-sales Service Centre.

TROUBLESHOOTING

Problem Possible cause Solution

The oven does not work

Power cut.

Disconnection from the mains.

Fault.

Check for the presence of mains

electrical power and whether the oven

is connected to the electricity supply.

Turn off the oven and restart it to see if

the fault persists.

The display does not turn on Oven OFF

Press

to switch the oven ON.

The buttons do not respond

O ven OFF.

Keypad lock activated.

Control panel dirty.

Press

to switch on the oven and see

whether the problem persists.

Deactivate the keypad lock by pressing

the

and buttons at the same

time.

Clean the surface of the control

panel with a microfibre cloth (see the

“Cleaning” section).

The time of day is flashing Power cut.

You need to reset the time: Follow the

instructions given in the “Using the

appliance for the first time” section.

The display shows the letter “F”

followed by a number

Software fault.

Contact you nearest Client After-sales

Service Centre and state the number

following the letter “F”.

The display's brightness is

reduced

The ECO function is enabled.

From the “Settings” - “ECO” section,

select the “No” option to deactivate it.

The oven makes noise, even when

it is switched off

Cooling fan

active.

Open the door or wait until the cooling

process has finished.

Read the safety instructions carefully before performing the following operations

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Commentaires sur ces manuels

Pas de commentaire

Hotpoint MP 996 IX H Guide d'utilisation et d'entretien Page 27

Commentaires sur ces manuels

Produits connexes et manuels pour Micro-ondes Hotpoint MP 996 IX H