Hotpoint MP 996 IX HA Guide d'utilisation et d'entretien télécharger pdf (Page 5)

to unpack and install the

appliance.

After unpacking the appliance,

make sure that it has not been

damaged during transport. In

the event of problems, contact

the dealer or your nearest After-

sales Service.

The appliance must be

disconnected from the power

supply before any installation

operation.

During installation, make sure

the appliance does not damage

the power cable.

Only activate the appliance

when the installation has been

completed.

This appliance is intended to be

used built-in. Do not use it

freestanding.

Carry out all cabinet cutting

works before tting the

appliance in the furniture and

carefully remove all wood chips

and sawdust.

After installation, the bottom of

the appliance must no longer be

accessible.

Do not obstruct the minimum

gap between the worktop and

the upper edge of the oven.

Only remove the oven from its

polystyrene foam base at the

time of installation.

After unpacking the appliance,

make sure that the appliance

door closes properly.

In the event of problems,

contact the dealer or your

nearest After-sales Service.

ELECTRICAL WARNINGS

For installation to comply with

current safety regulations, an

omnipolar switch with minimum

contact gap of 3 mm is required

and the appliance must be

earthed.

If the tted plug is not suitable

for your socket outlet, contact a

qualied technician.

The power cable must be long

enough to connect the

appliance, once tted in its

housing, to the main power

supply. Do not pull the power

supply cable.

If the power cable is damaged,

replace with an identical one.

The power cable must only be

replaced by a qualied

technician in compliance with

the manufacturer instruction

and current safety regulations.

Contact an authorized service

center.

For appliances with tted plug,

if the plug is not suitable for you

socket outlet, contact a qualied

technician.

Do not use extension leads,

multiple sockets or adapters.

Do not operate this appliance if

it has a damaged mains cord or

plug, if it is not working

properly, or if it has been

damaged or dropped. Keep the

cord away from hot surfaces.

The electrical components must

not be accessible to the user

after installation.

Do not touch the appliance with

any wet part of the body and do

not operate it when barefoot.

The rating plate is on the front

edge of the oven (visible when

the door is open).

In case of replacement of power

cable, use only following type(s):

H05RR - F3x1.5mm

It must be possible to

disconnect the appliance from

the power supply by unplugging

it if plug is accessible, or by an

accessible multi-pole switch

installed upstream of the socket

in conformity with national

electrical safety standards.

CLEANING AND

MAINTENANCE

Wear protective gloves for

cleaning and maintenance.

The appliance must be

disconnected from the power

supply before any maintenance

operation.

Never use steam cleaning

equipment.

WARNING: It is hazardous for

anyone other than a competent

person to carry out any service or

repair operation that involves the

removal of a cover which give

protection against exposure to

microwave energy.

WARNING: Ensure that the

appliance is switched o before

replacing the lamp to avoid

electric shock.

Failure to maintain the oven in a

clean condition could lead to

deterioration of the surface that

could adversely aect the life of

the appliance and possibly result

in a hazardous situation.

The oven shall be cleaned

regularly and any food deposits

removed.

Ensure the appliance is cooled

down before carrying out any

cleaning or maintenance.

Do not use harsh abrasive

cleaners or sharp metal scrapers

to clean the door glass since

they can scratch the surface,

which may result in shattering of

the glass.

1 2 3 4 5 6 7 8 9 10 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Hotpoint MP 996 IX HA Guide d'utilisation et d'entretien Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Micro-ondes Hotpoint MP 996 IX HA