Hotpoint PFH 406 A2+ Mode d'emploi télécharger pdf (Page 4)

ENERGYSAVING TIPS

• Install the appliance in a dry, well ventilated room far away

from any heat source (e.g. radiator, cooker, etc.) and in a

place not exposed directly to the sun. If required, use an

insulating plate.

• To guarantee adequate ventilation follow installation

instructions.

• Insucient ventilation on back of the product increases

energy consumption and decreases cooling eciency.

• The internal temperatures of the appliance may be aected

by the ambient temperature, frequency of door opening,

as well as location of the appliance. Temperature setting

should take into consideration these factors.

• Allow warm food and drinks to cool down before placing in

the appliance.

• After placing the food check if the door of compartments

closes properly, especially the freezer door.

• Reduce to a minimum door opening.

• When thawing frozen food, place them in the refrigerator.

The low temperature of the frozen products cools the food

in the refrigerator.

• Damaged gasket must be replaced as soon as possible.

• High energy class products are tted with high eciency

motors that remain operational for longer, but have a low

power consumption. Do not worry if the engine continues

to run for longer periods

• Before carrying out any maintenance or cleaning operation,

unplug the appliance or disconnect it from the power

supply.

• Use the refrigerator compartment only for storing fresh food

and the freezer compartment only for storing frozen food,

freezing fresh food and making ice cubes.

• Do not store glass containers with liquids in the freezer

compartment since they may break.

• Avoid storing unwrapped food in direct contact

with internal surfaces of the refrigerator or freezer

compartments.

ELECTRICAL CONNECTION FOR GREAT BRITAIN AND IRELAND ONLY

Warning – this appliance must be earthed.

Fuse replacement

If the mains lead of this appliance is tted with a BS 1363A 13amp fused plug, to change

a fuse in this type of plug use an A.S.T.A. approved fuse to BS 1362 type and proceed as

follows:

1. Remove the fuse cover (A) and fuse (B).

2. Fit replacement 13A fuse into fuse cover.

3. Ret both into plug.

Important:

The fuse cover must be retted when changing a fuse and if the fuse cover is lost the

plug must not be used until a correct replacement is tted.

Correct replacement are identied by the colour insert or the colour embossed in words

on the base of the plug.

Replacement fuse covers are available from your local electrical store.

For the Republic of Ireland only

The information given in respect of Great Britain will frequently apply, but a third type of plug and socket is also used, the 2-pin,

side earth type.

Socket outlet / plug (valid for both countries)

If the tted plug is not suitable for your socket outlet, please contact After-sales Service for further instruction.

Please do not attempt to change plug yourself. This procedure needs to be carried out by a qualied technician incompliance

with the manufactures instructions and current standard safety regulations.

• “The bulb used inside the appliance is specically designed

for domestic appliances and is not suitable for general room

lighting within the home (EC Regulation 244/2009)”.

The Manufacturer declines any liability for injury to

persons or animals or damage to property if the above

advice and precautions are not respected

1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire

Hotpoint PFH 406 A2+ Mode d'emploi Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Non Hotpoint PFH 406 A2+