Hotpoint AQ106D 49D IT Mode d'emploi télécharger pdf (Page 21)

2121

Wash cycles and options

Wash options

- If the selected option is not compatible with the

selected wash cycle, this incompatibility will be signalled

by the flashing of the indicator light and a sound alert

(3 beeps); the option will not be activated.

- If the selected option is not compatible with another option that

has been selected previously, the indicator light corresponding

to the first option selected will flash and only the second option

will be activated; the indicator light corresponding to the button

will remain lit in a constant manner.

Super Wash

This option offers a high-

performance wash due to the

greater quantity of water used in

the initial phase of the cycle, and

due to the increased wash cycle

duration, is particularly useful for

the removal of stubborn stains.

It can be used with or without

bleach. If you desire bleaching,

insert the extra tray compartment

(3) into compartment 1. When

pouring in the bleach, be careful not to exceed the “max” level

marked on the central pivot (see figure). To bleach laundry

without carrying out a full wash cycle, pour the bleach into the

extra compartment 3, select the “Rinse” cycle and activate

the “Super Wash” option .

Extra rinse

By selecting this option, the efficiency of the rinse is increased

and optimal residual detergent removal is guaranteed. It is

particularly useful for skin which is sensitive to detergents. We

recommend this option is used with a full load of washing, or

when a large amount of detergent is required.

Easy Iron

By selecting this option, the wash and spin cycles will be

modified in order to reduce the formation of creases.

At the end of the cycle the washing machine drum will

rotate slowly; the “Easy Iron” and START/PAUSE indicator

lights will flash. To end the cycle press the START/PAUSE

button or the “Easy Iron” button.

Prewash

If this function is selected, the pre-wash cycle will run; this is

useful for removing stubborn stains.

N.B.: put the detergent in the relevant compartment.

Table of wash cycles

Note: 10 minutes after the START, the machine will recalculate the time remaining until the end of the wash cycle on the basis of the load inside it; this value will then be shown on the display.

The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as

water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.

1) Test wash cycle in compliance with directive 1061/2010: set wash cycle with a temperature of 60°C.

This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments

which can be washed at 60°C. The actual washing temperature may differ from the indicated value.

2) Test wash cycle in compliance with directive 1061/2010: set wash cycle with a temperature of 40°C.

This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments

which can be washed at 40°C. The actual washing temperature may differ from the indicated value.

For all Test Institutes:

2) Long wash cycle for cottons: set wash cycle with a temperature of 40°C.

3) Long wash cycle for synthetics: set wash cycle with a temperature of 40°C.

* If you select programme and exclude the spin cycle, the machine will drain only.

** The duration of the wash cycle can be checked on the display.

Icon

Description of the wash cycle

Max.

temp.

(°C)

Max.

speed

(rpm)

Detergent and additives

Max. load

(kg)

Residual

dampness

Energy

consum-

ption kWh

Total water

Cycle dura-

tion

Prewash

Wash

Bleach

Fabric

softener

Cotton: heavily soiled whites and resistant colours.

60°

(Max. 90°)

1400

   

10 - - -

Multi Colour

20° 1400 -



9 - - -

Coloureds Intensive

40° 1400

 



9 - - -

Darks

30° 800 -



6 - - -

Synthetics Resistant

60° 1000

   

5 48 1,21 78 125’

Synthetics Resistant (3)

40° 1000

   

5 - - -

Shirts

40° 600 -

  

2,5 - - -

Duvets: for down-stuffed garments.

30° 1000 -



3,5 - - -

Bed&Bath for bedlinen and towels.

60° 1400

   

10 - - -

Rinse

- 1400 - -

 

10 - - -

Spin and Pump out

- 1400 - - - - 10 - - -

“Pump out” only *

- OFF - - - - 10 - - -

Anti Allergy Plus

60° 1400 -



6 - - -

Anti Allergy Delicate

40° 1400 -



6 - - -

Ultradelicates

30° 0 -



1 - - -

Wool Platinum Care: for wool, cashmere, etc.

40° 800 -



2,5 - - -

Mix 30': to refresh lightly soiled garments quickly (not suitable for

wool, silk and clothes which require washing by hand).

30° 800 -



4 71 0,20 44 30’

Eco Cotton 60°C (1): heavily soiled whites and resistant colours.

60° 1400 -



10 53 0,84 59,9 210’

Eco Cotton 40°C (2): lightly soiled whites and delicate colours.

40° 1400 -



10 53 0,90 96 200’

1 2 ... 16 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire

Hotpoint AQ106D 49D IT Mode d'emploi Page 21

Commentaires sur ces manuels

Produits connexes et manuels pour Machines à laver Hotpoint AQ106D 49D IT