Hotpoint AQD1071F 49ID TK Mode d'emploi Page 21

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 24
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 20
GB
21
Wash options
- If the selected option is not compatible with the
selected wash cycle, this incompatibility will be signalled
by the flashing of the indicator light and a sound alert
(3 beeps); the option will not be activated
- If the selected option is not compatible with another
option that has been selected previously, the indicator
light corresponding to the first option selected will
flash and only the second option will be activated; the
indicator light corresponding to the button will remain lit
in a constant manner.
Extra rinse
By selecting this option, the efficiency of the rinse is
increased and optimal residual detergent removal is
guaranteed. It is particularly useful for skin which is
sensitive to detergents. We recommend this option is used
with a full load of washing, or when a large amount of
detergent is required.
Easy Iron
By selecting this option, the wash and spin cycles will be
modified in order to reduce the formation of creases.
At the end of the cycle the wasdher-dryer drum will
rotate slowly; the “Easy Iron” and START/PAUSE indicator
lights will flash. To end the cycle press the START/PAUSE
button or the “Easy Iron” button.
Note: If you also want to run the drying cycle, this option is
enabled only if combined with level “L1”.
Spin reduction
By selecting this function, halves the spin speed.
Prewash
If this function is selected, the pre-wash cycle will run; this
is useful for removing stubborn stains.
N.B.: put the detergent in the relevant compartment.
Wash cycles and options
Table of wash cycles
For all Test Institutes:
1) Test wash cycle in compliance with regulation EN 50229: set wash cycle
60°/40°
with a temperature of 60°C.
2) Long wash cycle for cottons: set wash cycle
60°/40°
with a temperature of 40°C.
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as
water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
Icon
Description of the wash cycle
Max. temp.
(°C)
Max.
speed
(rpm)
Drying
Maximum load
for drying (Kg)
Detergent and
additives
Maximum load
for washing
(Kg)
Cycle duration
Prewash
Wash
Fabric
softener
Cotton: heavily soiled whites and resistant colours.
60°
(Max. 90°C)
1400
7
10
Synthetics
60° 1000
5
5
Multi Colour
20° 1400
4,5 -
9
Coloureds Intensive
40° 1400
7
9
Darks
30° 800
3 -
6
Drying Cottons
- -
7 - - - -
Drying Synthetics
- -
5 - - - -
Drying Wool
- -
2,5 - - - -
Rinse
- 1400
7 - -
10
Spin and Pump out
- 1400
7 - - -
10
Drain only *
- OFF
- - - - -
10
Anti Allergy Plus
60° 1400
6 -
6
Anti Allergy Delicate
40° 1400
6 -
6
Ultradelicates
30° 0
1
-
1
Wool Platinum Care: for wool, cashmere, etc.
40° 800
2,5
-
2,5
Mix 30’ (***): to refresh lightly soiled garments quickly (not suitable for wool,
silk and clothes which require washing by hand).
30° 800
1 -
4
60°/40°
Eco Cotton (1): heavily soiled whites and resistant colours.
60° 1400
7 -
10
60°/40°
Eco Cotton (2): heavily soiled whites and delicate colours.
40° 1400
7 -
10
(**) The duration of the wash cycles can be checked on the display.
** Note: 10 minutes after the START, the machine will recalculate the time remaining until the end of the wash cycle on the basis of the load inside it; this value will then be shown on the display.
* If you select programme and exclude the spin cycle, the machine will drain only.
*** If a drying cycle is also programmed, the machine will run a “wash+dry” programme lasting 45’ with maximum spin speed and a 1kg laundry load.
Vue de la page 20
1 2 ... 16 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire