Hotpoint FML 703 EU Mode d'emploi télécharger pdf (Page 21)

Setting the temperature

TurntheTEMPERATUREknobtosetthewashtemperature(seeTable of wash cycles).

The temperature may be lowered, or even set to a cold wash ( ).

The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value

set for each wash cycle.

! Exception: if the 4 programme is selected, the temperature can be increased up to a value of 90°C.

Setting the spin speed

Turn the SPIN SPEED knob to set the spin speed for the selected wash cycle.

The maximum spin speeds available for each wash cycle are as follows:

Wash cycles Maximum spin speed

Cottons 1000 rpm

Synthetics 800 rpm

Wool 800 rpm

Silk drain only

The spin speed may be lowered, or the spin cycle can be excluded altogether by selecting the symbol .

The washing machine will automatically prevent you from selecting a spin speed which is higher than the maximum speed

set for each wash cycle.

Functions

The various wash functions available with this washing machine will help to achieve the desired results, every time.

To activate the functions:

1. Press the button corresponding to the desired function;

2. the function is enabled when the corresponding indicator light is illuminated.

Note:

- If the selected function is not compatible with the programmed wash cycle, the corresponding indicator light will flash and

a sound alert (3 beeps); the function will not be activated.

- If a function which is incompatible with another function selected previously, only the most recent selection will remain active.

Super Wash

This option offers a high-performance wash due to the greater quantity of water used in the initial phase of the cycle, and due

to the increased wash cycle duration, is particularly useful for the removal of stubborn stains. It can be used with or without

bleach. If you desire bleaching, insert the extra tray compartment (4) into compartment 1. When pouring in the bleach, be

carefulnottoexceedthe“max”levelmarkedonthecentralpivot(see figure pag. 22).

Easy iron

Byselectingthisfunction,thewashandspincycleswillbemodifiedinordertoreducetheformationofcreases.Attheendof

thecyclethewashingmachinewillperformslowrotationsofthedrum;theEASYIRONindicatorlightwillflashandtheEND

phasewillremainlitinafixedmanner.Toendthecycle,presstheSTART/PAUSEbuttonortheEASYIRONbutton.

Prewash

If this function is selected, the pre-wash cycle will run; this is useful for removing stubborn stains.

N.B.: Put the detergent in the relevant compartment.

Delay timer

This timer delays the start time of the wash cycle by up to 12 hours.

Press the button repeatedly until the indicator light corresponding to the desired delay time switches on. The fifth time the but-

ton is pressed, the function will be disabled.

N.B. Once you have pressed the START/PAUSE button, the delay time may only be decreased if you wish to modify it.

Personalisation

1 2 ... 16 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire

Hotpoint FML 703 EU Mode d'emploi Page 21

Commentaires sur ces manuels

Produits connexes et manuels pour Machines à laver Hotpoint FML 703 EU