Hotpoint RSPD 723 DK UA Guide de l'utilisateur télécharger pdf (Page 3)

Darks: this cycle is designed to preserve dark colours over time. We

recommend using a liquid detergent for best results, preferably when

washing dark-coloured garments.

Whites: this wash cycle is designed to preserve the brightness of white

garments over time. Use powder detergent for best results.

Prewash ( )

If this option is selected, the pre-wash cycle will run; this is useful for

removing stubborn stains.

N.B.: Put the detergent in the relevant compartment.

Delay ( c)

To set a delayed start for the selected cycle, press the corresponding

button repeatedly until the desired delay period is reached. To remove

the delayed start setting, press the button until “-- h” appears on the

display.

Temperature

Each wash cycle has a pre-dened temperature. To modify the

temperature, press the button. The value will appear on the display.

Spin

Each wash cycle has a pre-dened spin speed. To modify the spin speed,

press the button. The value will appear on the display.

Multi Rinse

This option allows for selecting the desired rinse type to protect sensitive

skin. Press the button once to set level “Extra +1”, which allows for

selecting an additional rinse to the standard cycle rinses and removing all

traces of detergent. Press the button again to set level “Extra +2”, which

allows for selecting two additional rinses to the standard cycle rinses; this

cycle is recommended for very sensitive skin. When the button is pressed

for the third time, the “Extra +3” level is set, which allows for selecting

3 additional rinses to the standard cycle rinses. When started with

cycles at a temperature of 40°C, this option makes it possible to remove

major allergens such as pollen and cat or dog hair. With cycles running

at temperatures higher than 40°C, an excellent level of anti-allergy

protection is achieved. Press the button again to return to the “Normal

Rinse” mode. If the current mode cannot be set nor changed, the display

will show “Not Selection” or “Not Change”.

Cleaning Action

Option makes it possible to optimise washing based on the level of

soil in the fabrics and on desired wash cycle intensity.

For heavily-soiled garments press button until the “Intensive Wash”

level is reached. This level ensures a high-performance wash due to a

larger quantity of water used in the initial phase of the cycle and due to

increased drum rotation. It is useful when removing the most stubborn

stains.

For lightly-soiled garments or a more delicate treatment of the fabrics,

press button until the “Delicate wash” level is reached.

The cycle will reduce the drum rotation to ensure washing results are

perfect for delicate garments.

KEY LOCK

To activate the control panel lock, press and hold the button for

roughly 2 seconds. When the display visualises “KEY LOCK ON”, the control

panel is locked (except for the ON/OFF button ). This will prevent

accidental modications to wash cycles, especially when children are at

home. To deactivate the control panel lock, press and hold the

button for approximately 2 seconds.

TIPS AND SUGGESTIONS

Divide the laundry according to:

Type of fabric (cotton, mixed bres, synthetics, wool, garments to be

hand-washed). Colour (separate coloured garments from whites, wash

new coloured garments separately). Delicates (small garments – such as

nylon stockings – and items with hooks – such as bras: insert them in a

fabric bag).

Empty the pockets:

Objects such as coins or lighters can damage the washing machine and

the drum. Check all buttons.

CARE AND MAINTENANCE

Before performing cleaning and maintenance, switch the washing machine

o and disconnect it from the mains power. Do not use ammable liquids to

clean the washing machine.

Cutting o the water and electricity supplies

Turn o the water tap after every wash cycle. This will limit wear on the

hydraulic system inside the washing machine and help to prevent leaks.

Unplug the washing machine when cleaning it and during all

maintenance work.

Cleaning the washing machine

The outer parts and rubber components of the appliance can be cleaned

using a soft cloth soaked in lukewarm soapy water. Do not use solvents or

abrasives. The washing machine has a “Auto Clean” cycle for its internal

parts; it must be run without any load in the drum.

To activate the cycle, press the button for 5 seconds then press START/

PAUSE to start the cycle, which will last roughly 70 minutes.

A message on the display will regularly (roughly every 50 cycles) advise

the user to run the Auto Clean cycle to clean the washing machine and

combat limescale build-up and bad odours.

For optimal maintenance we suggest using WPRO Limescale and grease

remover, according to the instructions shown on the package. The

product can be purchased by contacting the technical assistance service

or through the website www.hotpoint.eu.

Hotpoint declines all liability for any damages to the appliance caused by

the use of other cleaning products for washing machines available on the

market.

Cleaning the detergent dispenser drawer

Remove the dispenser drawer by lifting and pulling it outwards. Wash it

under running water; this procedure should be eected regularly.

Caring for the door and drum

Always leave the porthole door ajar in order to prevent unpleasant odours

from forming.

Cleaning the pump

The washing machine is tted with a Auto Clean pump which does not

require any maintenance. Small items (such as coins or buttons) may

sometimes fall into the protective pre-chamber situated at the base of the

pump.

! Make sure that the wash cycle has ended and unplug the appliance.

To access the pre-chamber:

1. remove the covering panel on the front side of the machine by

inserting a screwdriver in the centre and sides of the panel and using it as

a lever;

2. loosen the drainage pump cover by turning it anti-clockwise: it is

normal for some water to leak out;

3. clean the inside thoroughly;

4. screw the cover back on;

5. put the panel back in place, making sure the hooks slot in place before

pushing the panel onto the appliance.

Checking the water inlet hose

Check the inlet hose at least once a year. If it is cracked or broken, it must

be replaced: during wash cycles, the high pressure of the water could

suddenly split the hose open.

! Never use hoses that have already been used.

LOAD BALANCING SYSTEM

Before every spin cycle, to avoid excessive vibrations before every

spin and to distribute the load in a uniform manner, the drum rotates

continuously at a speed which is slightly greater than the washing

rotation speed. If, after several attempts, the load is not balanced

correctly, the machine spins at a reduced spin speed. If the load is

excessively unbalanced, the washing machine performs the distribution

process instead of spinning. To encourage improved load distribution and

balance, we recommend small and large garments are mixed in the load.

ACCESSORIES

Contact our Technical Assistance Service to check whether the following

accessories are available for this washing machine model.

Stacking kit

With this accessory you can secure the tumble dryer to the upper part of

your washing machine to save space and facilitate loading and unloading

of the tumble dryer.

TRANSPORT AND HANDLING

Do not lift the washing machine by gripping it from the upper section.

Unplug the appliance and close the water tap. Check that the door and

detergent dispenser drawer are tightly closed. Detach the lling hose

from the water tap then detach the drain hose. Empty all the water

remaining in the hoses and secure the latter so that they do not get

damaged during transport. Apply the transport bolts back on. Repeat, in

reverse order, the transport bolt removal procedure described in the

“Installation instructions”.

1 2 3 4

Commentaires sur ces manuels

Pas de commentaire

Hotpoint RSPD 723 DK UA Guide de l'utilisateur Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Machines à laver Hotpoint RSPD 723 DK UA