Hotpoint DWF61 Manuel d'utilisateur télécharger pdf (Page 21)

Regular inspection and maintenance of your

appliance helps to prevent problems from

occurring.This saves time and aggravation.

You should therefore carefully inspect the

inside of your dishwasher from time to time.

Overall condition of appliance.

- Check that no grease or scale has

accumulated on the inside of the

dishwasher.

If you discover any deposits:

- Clean the interior of the dishwasher

thoroughly with a detergent solution.

Dishwasher salt.

The SALT REFILL indicator 5 on the control

panel will illuminate when salt is required.You

can also check the salt container itself.

Rinse-aid.

The RINSE-AID indicator 6 on the control

panel will illuminate when rinse-aid is

required. Also check the level indicator on the

container.

Filters.

The filters prevent large particles of food or

other objects from getting inside the pump.

This residue can occasionally block the filters.

The filter system consists of a filter cylinder, a

flat fine filter and depending on the Model, a

microfilter (*).

- Inspect the filters for obstructions every

time the dishwasher has been used.

- By unscrewing the filter cylinder, you

can remove the filter system. Remove

any food remnants and clean the filters

under running water.

Remove any particles of food and rinse

the filters under running water.

Reassembly:

- Insert the filter system and screw down

with the filter cylinder.

Ensure that the filter is locked in place by

screwing down until the two arrows are

aligned (as above).

Care and Maintenance...

21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Commentaires sur ces manuels

Pas de commentaire