Hotpoint LBF 5B AUS Mode d'emploi télécharger pdf (Page 11)

Rinse aid

Only use products which have been specifically designed

for dishwashers.

Do not use washing-up liquid.

Follow the instructions given on the packaging.

If using a multi-functional product it is not necessary to add

any rinse aid.

If you do not add rinse aid, the LOW RINSE AID indicator

light will stay lit.

Measuring out the rinse aid

Rinseaidmakesiteasierforthecrockerytodry,aswaterruns

off surfaces more readily and therefore does not leave streaks

or marks.

The rinse aid dispenser should be filled:

•WhentheLOWRINSEAID* indicator light on the control

panel is illuminated;

1.Openthedispenserbyturning

the lid (G) in an anticlockwise

direction.

2. Pour in the rinse aid, making

sure it does not overflow from the

dispenser. If this happens, clean

the spill immediately with a dry

cloth.

3. Screw the lid back on.

NEVER pour the rinse aid directly into the appliance tub.

Adjusting the amount of rinse aid

If you are not completely satisfied with the drying results, you

mayadjustthequantityofrinseaidused.Useascrewdriverto

turn the dosage adjuster (F) to one of the 6 pre-set positions

(the default position is set to 4):

•Iftherearestreaksonthecrockery,settheadjustmentdevice

toalowernumber(1-3).

•Ifdropsofwaterremainonthecrockeryoriftherearelimescale

marks present after the cycle has finished, set the adjuster to

a higher number (4-6).

* Only available in selected models.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Hotpoint LBF 5B AUS Mode d'emploi Page 11