Hotpoint WSIC 3M27 C Guide de l'utilisateur télécharger pdf (Page 6)

DAILY USE

ADVICE AND TIPS

TIPS

Before loading the baskets, remove all food residues from the crock-

ery and empty the glasses. You do not need to rinse beforehand

under running water.

Arrange the crockery so that it is held in place rmly and does not tip

over; and arrange the containers with the openings facing down-

wards and the concave/convex parts placed obliquely, thus allowing

the water to reach every surface and ow freely.

Warning: lids, handles, trays and frying pans do not prevent the

sprayer arms from rotating.

Place any small items in the cutlery basket.

Very soiled dishes and pans should be placed in the lower basket be-

cause in this sector the water sprays are stronger and allow a higher

washing performance.

After loading the appliance, make sure that the sprayer arms can

rotate freely.

HYGIENE

To avoid odour and sediment which can be accumulated in the dish-

washer please run a high temperature program at least one a month.

Use a tea spoon of detergent and run it without the loading to clean

your appliance.

UNSUITABLE CROCKERY

• Wooden crockery and cutlery.

• Delicate decorated glasses, artistic handicraft and antique crockery.

Their decorations are not resistant.

• Parts in synthetic material which do not withstand high tempera-

tures.

• Copper and tin crockery.

• Crockery soiled with ash, wax, lubricating grease or ink.

The colours of glass decorations and aluminium/silver pieces can

change and fade during the washing process. Some types of glass

(e.g. crystal objects) can become opaque after a number of wash

cycles too.

DAMAGE TO GLASS AND CROCKERY

• Only use glasses and porcelain guaranteed by the manufacturer as

dishwasher safe.

• Use a delicate detergent suitable for crockery

• Collect glasses and cutlery from the dishwasher as soon as the

wash cycle is over.

1. CHECK WATER CONNECTION

Check that the dishwasher is connected to the water supply and

that the top is open.

2. SWITCH ON THE DISHWASHER

Open the door and press the ON/OFF button.

3. LOAD THE RACKS

(see LOADING THE RACKS).

4. FILLING THE DETERGENT DISPENSER

(see PROGRAMS TABLE).

5. CHOOSE THE PROGRAM AND CUSTOMISE THE CYCLE

Select the most appropriate program in accordance with the type

of crockery and its soiling level (see PROGRAMS DESCRIPTION) by

pressing the P button.

Select the desired options (see OPTIONS AND FUNCTIONS).

6. START

Start the wash cycle by pressing START/Pause button (led is lit)

and closing the door within 4 sec. When the program starts you

hear a single beep. If the door was not closed within 4sec., the

alarm sound will be played. In this case, open the door, press

START/Pause button and close the door again within 4 sec.

7. END OF WASH CYCLE

The end of the wash cycle is indicated by beeps and by the ash-

ing of the wash cycle number on the display. Open the door and

switch o the appliance by pressing the ON/OFF button.

Wait for a few minutes before removing the crockery - to avoid

burns. Unload the racks, beginning with the lower one.

The machine will switch o automatically during certain extended

periods of inactivity, in order to minimise electricity consumption.

If the crockery is only lightly soiled or if it has been rinsed with

water before being placed in the dishwasher, reduce the amount

of detergent used accordingly.

MODIFYING A RUNNING PROGRAM

If a wrong program was selected, it is possible to change it, provided

that it has only just begun: open the door, press and hold the

ON/OFF button, the machine will switch o.

Switch the machine back on using the ON/OFF button and select the

new wash cycle and any desired options; start the cycle by pressing

the START/Pause button and closing the door.

ADDING EXTRA CROCKERY

Without switching o the machine, open the door (START/Pause

led starts blinking) (be ware of HOT steam!) and place the crockery

inside the dishwasher. Press the START/Pause button and close the

door within 4 sec., the cycle will resume from the point at which it

was interrupted.

ACCIDENTAL INTERRUPTIONS

If the door is opened during the wash cycle, or if there is a power cut,

the cycle stops. To resume the cycle from where it was interrupted,

press the START/Pause button and close the door.

For more information about the functions, you can request or

download from the WEB a Use & Care Guide by following the

instructions on the last page.

1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire

Hotpoint WSIC 3M27 C Guide de l'utilisateur Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Lave-vaisselle Hotpoint WSIC 3M27 C