Hotpoint TDL52 Manuel d'utilisateur télécharger pdf (Page 20)

Problem

‘It won’t start’

‘It is taking a long

time to dry’

Auto

Programmes

Any other

problem

First, don’t panic! There may be nothing wrong at all. Look for your

problem below, then check the things we suggest. More often than

not, this will give you the answer to your problem, and you’ll be able

to carry on without having to telephone your Service Office.

If after this you still cannot get your machine to work, follow the

advice given on the next page.

Check these things first

1. Is the machine plugged in and switched on at the socket?

2. Is the timer control set to required time?

3. Is the door securely closed?

4. Has the fuse blown? (Try plugging in another appliance to check)

5. Is the Timer Delay control set to zero?

6. Have you used an extension lead? Many are not suitable. Try

plugging the dryer directly into a socket to check.

1. Have you forgotten to clean the filter? Check it.

2. Have you selected the correct Heat setting for the type of fabric

you are drying?

3. Is the flexible Vent Hose blocked or kinked? Check it for foreign

objects or condensate (water).

4. Is the air inlet obstructed in any way?

5. Permanent venting - is flap on the storm cover obstructed?

6. Were the clothes ‘excessively wet’ when they were put in?

7. Was the correct time selected?

8. Have you overloaded the dryer?

1. Has the correct programme been selected for the load?

3 - 5kg programme

✽ (large)

1 - 3kg programme

✽ (small)

Less than 1kg, use timed dry programme.

2. Has HIGH heat been selected?

The auto programmes will not operate on low heat, if low heat is

required use timed dry.

Have you re-read this instruction book?

If something goes wrong

1 2 ... 15 16 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire

Hotpoint TDL52 Manuel d'utilisateur Page 20

Commentaires sur ces manuels

Produits connexes et manuels pour Séchoirs Hotpoint TDL52