Hotpoint LD70 N1 X UK Mode d'emploi télécharger pdf (Page 5)

* Varies by number and/or position, available only on certain

models.

Start-up and use

Starting the appliance

! Before starting the appliance, follow the installation

instructions (see Installation).

! Before connecting the appliance, clean the compartments and

accessories well with lukewarm water and bicarbonate.

! Electronic versions are provided with a motor protection switch

that powers on the compressor only almost 8 minutes after the

starting. The compressor also starts each time the power supply

is cut off whether voluntarily or involuntarily (blackout).

1. Insert the plug into the socket and make sure that the inside

light turns on.

2. Turn the knob to set the temperature on the range ECO. After

a few hours you can put food in the refrigerator

Setting the temperature*

= warmest

= coldest

The temperature inside the refrigerator compartment is adjusted

depending on the position of the thermostat knob.

For environment average temperatures (25 ± 5 ° C), in order to get

the right balance between performance and power consumption,

we recommend using the thermostat positions included in the

range ECO.

You turn off the product by setting it on the OFF position.

AIR*

It is recommended to activate Fridge AIR by turning ON button

in high ambient temperature , over 30°C.

After Air enable temperature in fridge compartment will drop, it

can be necessary to regulate thermostat knob to warmer position.

it is recomanded to turn OFF AIR when ambient temperature

turn back to temperature below 30°C, and regulate product to

reachrequired temperatures.Do not block the air inlet with foods.

Using the refrigerator to its full potential

• Place only cold or lukewarm foods in the compartment, never

hot foods (See Flexi USE BOX where present)

• Remember that cooked foods do not last longer than raw foods.

• Do not store liquids in open containers: they will increase the

level of humidity in the refrigerator and cause condensation to

form.

SHELVES: with or without grill.

They are removable and adjustable in height and depth thanks to

the special guides (see the picture), allowing easy storage of large

containers and food. Height can be adjusted without complete

removal of the shelf.

TEMPERATURE Indicator light*: to identify the coldest area in

the refrigerator.

1. Check that OK appears clearly on the indicator light (see

diagram).

2. If the word “OK” does not appear it means that the temperature

is too high:set the FRIDGE TEMPERATURE on a colder value,

and then wait 10 hours until the temperature becomes stable.

3. Check the indicator light again: if necessary, readjust it

following the initial process. If large quantities of food have

been added or if the refrigerator door has been opened

frequently, it is normal for the indicator not to show OK. Wait

at least 10 hours before you set the FRIDGE temperature on a

colder value.

FLEXI USE BOX* container

This is the new box which offers maximum flexibility in order to

stock your food in an excellent way.

If you put in the low section of your fridge compartment, on the

crisper box, it becomes CHILLER, and it guarantees a temperature

very close to 0°C, which is ideal to:

-store meat, fish and delicate food;

-rapid cooling of hot foods;

-low temperature defrosting (it inhibits the proliferation of

microorganisms).

You can get the 0°C temperature, in standard conditions, when

the fridge compartment temperature is at about 4°C.

By decreasing the fridge temperature you decrease the CHILLER

compartment temperature too.

If you put it in the “upper” part of the fridge compartment (A1), it

will be suitable to store fruit and vegetables, thus giving you the

possibility to have a second crisper box.

1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire

Hotpoint LD70 N1 X UK Mode d'emploi Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Congélateurs Hotpoint LD70 N1 X UK