Hotpoint CH10756GF Mode d'emploi télécharger pdf (Page 30)

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

The cooker is designed to match the depth of standard 600mm worktops.

An adaptor backplate should, therefore, be fitted within the shaded area shown to allow the cooker to be

pushed fully to the wall. If a forward facing backplate is used, it must be chased into the wall.

250

750

Connection to the cooker should be made with an approved appliance flexible connection to BS 669. A length of

0.9 to 1.25m is recommended. The length of hose chosen should be such that when the cooker is in situ, the

hose does not touch the floor.

The temperature rise of areas at the rear of the cooker that are likely to come in contact with the flexible hose do

not exceed 70°C.

INSTALLATION INSTRUCTIONS

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36

Pas de commentaire

Hotpoint CH10756GF Mode d'emploi Page 30