Hotpoint CIF 952 BXLD B Mode d'emploi télécharger pdf (Page 8)

EN7

Connect the yellow/green earth wire to the terminal with the symbol .

This wire must be longer than the other wires.

1. Remove the terminal block cover (A), undoing the screw and inserting the cover in the terminal block hinge (B).

2. Strip approx. 70 mm of sheath from the power supply cable.

3. Strip approx. 10mm of sheath from the conductors. Insert the power cable in the cable clamp and connect the wires to the terminal block as indicated in the

connection diagram located near it.

4. Secure the power cable with the cable clamp.

5. Close the cover (C) and screw it on the terminal block with the previously removed screw.

Each time the power is connected, the hob performs an automatic check for a few seconds.

Connect the appliance to the power supply by means of a multipole switch with minimum contact gap of 3mm.

Control Panel Description

The panel has touch controls: to use them, just press the corresponding symbol (a light touch is sufficient).

First use / after a power failure

After connecting the hob to the electrical power supply, the control panel is locked (the indicator light above the key is ON).

To unlock the control panel, press and hold the key for 3 seconds. The indicator light switches off and the hob can be used normally.

Switching the hob On/Off

To switch the hob on, press and hold the key for approx. 2 seconds: the indicator light above the key switches on and dashes appear inside the circles indicating

the cooking zones. To switch off, press the same button until the hob switches off. All the cooking zones are deactivated.

Switching the single cooking zone OFF

To switch the single cooking zone OFF, press the corresponding button.

Wires Number x size

220-240 V ~ +

3 x 4 mm

220-240 V 3 ~ +

4 x 1.5 mm

380-415 V 3N ~ +

5 x 1.5 mm

380-415 V 2N ~ +

4 x 1.5 mm

INSTRUCTIONS FOR USE

The hob automatically switches off if no function is selected within 10 seconds of switching on.

230 V

380-415 V 3N ~ 220-240 V ~ 220-240 V ~ (AU and UK)

380-415 V 2N ~

220-240 V 3 ~ (Belgium only) 380-415 V 2N ~ (Holland only)

CBA

To select and activate the cooking zones

Hob ON/OFF

To set the minute

counter

To enable the hold

function

Slide touchscreen To lock the control panelTo select one of the automatic functions

To select the FLEXI ZONE function

To switch off the

single cooking zone

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Hotpoint CIF 952 BXLD B Mode d'emploi Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Plaques chauffantes Hotpoint CIF 952 BXLD B