Hotpoint ET6004 Manuel d'utilisateur télécharger pdf (Page 4)

Advice and recommendations

• This appliance was designed for non-professional,

household use.

• Before using the appliance, read the instructions in the

owner’s manual carefully since it contains all the instruc-

tions you require to ensure safe installation, use and

maintenance. Keep this owner’s manual in a safe place

for future reference.

• When you have removed the packing, check whether

the appliance is intact. If you have any doubts, contact

a qualified professional before using the appliance.

• Never leave the packing components (plastic bags, poly-

styrene foam, nails, etc.) within the reach of children

since these are a source of potential danger.

• The appliance must be installed by a qualified techni-

cian in compliance with the instructions provided by the

manufacturer.

• The latter denies all responsibility for improper installa-

tion which may harm persons and animals and damage

property.

• The electrical safety of this appliance can only be guar-

anteed if the latter is correctly and efficiently earthed, in

compliance with regulations on electrical safety. Always

ensure that this vital safety measure has been taken. If

you have any doubts, call in a qualified technician to

check the electrical system thoroughly.

• The manufacturer denies all responsibility for damage

resulting from a system which has not been earthed cor-

rectly.

• Before powering the appliance, check whether the tech-

nical characteristics featured on the appliance data plate

correspond with those of the mains electrical system.

• Check that the current load of the mains supply and of

the power sockets is suitable for the maximum power of

the appliance, indicated on the appliance data plate. If in

doubt, contact a qualified professional.

• This appliance must only be used for the purpose for

which it was expressly designed. Any other use (such

as heating a room for example) is considered to be im-

proper and consequently dangerous.

• The manufacturer denies all responsibility for damage

resulting from improper or incorrect use of the appliance.

First use: the glue used on the hob seals may leave greasy traces on the glass surface. We recommend you wipe these

off before using the appliance, with the aid of a non abrasive cleaner. During the first few hours of use, you may detect

a smell of rubber, which will disappear quickly.

• Certain fundamental rules must be followed when using

electrical appliances. The following are of particular im-

portance:

• do not touch the appliance with wet or damp hands,

• never use the appliance when barefoot,

• never use extensions,

• never pull on the power supply cable or the appliance

itself to unplug it from the mains socket,

• never leave the appliance exposed to atmospheric agents

(rain, sun, etc.),

• do not allow children or persons who are not familiar with

the appliance to use it without supervision.

• Always unplug the appliance from the mains or switch

off the main switch before cleaning or performing any

cleaning or maintenance operations.

• If the surface of the glass cracks, unplug the appli-

ance immediately. For any repairs, contact only an au-

thorised after-sales service centre and demand original

spare parts. Failure to comply with the above may com-

promise the safety of the appliance.

• Cut the power supply cable after disconnecting it from

the power mains when you decide not to use the appli-

ance any longer. Also make all potentially dangerous

parts of the appliance safe, above all for children who

could play with the appliance.

• The glass ceramic hob is resistant to thermal and me-

chanical shocks. However, it may break due to a shock

caused by a sharp object, such as a tool for exam-

ple. In this case, unplug the appliance immediately

and contact an authorised after-sales service centre

to have it repaired.

• Remember that the heating area stays hot for at least

half an hour after being turned off; please refrain from

placing any cookware or other items on the cooking zone

while still hot.

• Do not turn on the heating zones if aluminium foil or

plastic items have been placed on the hob surface.

• Do not go near the heating zones when these are still

hot.

• If you use small electric appliances near the hob, make

sure their power supply cable does not come into con-

tact with the hot parts of the hob.

• Make sure all pan handles are always pointing inwards

towards the centre of the hob to prevent any accidental

spills.

 Make sure that the air inlet behind the fan grille is

never obstructed. The built-in hob should, in fact, be

provided with suitable ventilation for the cooling of the

electronic components used in the appliance.

 We advise against the installation of an induction hob

above an under-the-counter refrigerator (heat) or above

a washing machine (vibrations). In fact, there would be

insufficient space for the ventilation of electronic

components.

1 2 3 4 5 6 7 8 9 ... 15 16

Commentaires sur ces manuels

Pas de commentaire

Hotpoint ET6004 Manuel d'utilisateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Plaques chauffantes Hotpoint ET6004