Hotpoint GE740TCX Manuel d'utilisateur télécharger pdf (Page 7)

Troubleshooting

If the burner does not remain on when set to "Low".

Check to make sure that:

• The gas holes are not clogged.

• There are no draughts near the cooking surface.

• The minimum has been adjusted correctly (see Installation

section, "Minimum Regulation").

If the cookware is not stable.

Check to make sure that:

• The bottom of the cookware is perfectly flat.

• The cookware is centered correctly on the burner .

• The support grids have not been inverted.

If, despite all of these checks, the hob does not function

properly and problem persists, call Hotpoint Service (see

KEY CONTACTS, back page), informing them of:

- The type of problem.

- The abbreviation used to identify the model (Mod. ...) as

indicated on the warranty.

IMPORTANT:

Never call upon technicians not authorized by the

manufacturer, and refuse to accept spare parts that are not

original.

Before calling service for assistance, check through the

following list, there may be nothing wrong.

First of all, check to see that there are no interruptions in the

gas and electrical supplies, and, in particular, that the gas

valves for the mains are open.

If the burner does not light or the flame is not uniform

around the burner.

Check to make sure that:

• The gas holes on the burner are not clogged.

• All of the movable parts that make up the burner are

mounted correctly.

• There are no draughts around the cooking surface.

If the flame does not stay lit on a model with the

Flame Failure device.

Check to make sure that:

• You press the knob all the way in.

• You keep the knob pressed in long enough to activate

the flame failure device.

• The gas holes are not clogged in the area corresponding

to the flame failure device.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Pas de commentaire

Hotpoint GE740TCX Manuel d'utilisateur Page 7