Hotpoint EG72 Manuel d'utilisateur télécharger pdf (Page 22)

PROBLEM CHECK

Ignition does not work.

SOMETHING WRONG WITH YOUR COOKER

Before contacting your Service Centre or Installer, check the problem guide

below, there may be nothing wrong with your cooker.

Burner ports Ignitor

Hotplate burner.

f all burners fail to ignite:

Check that sparks appear at the burners; a clicking

noise should be heard.

If not

Check that the electricity supply is turned on.

If the electricity supply has failed, the hotplate

burners can be lit by a match.

f only one burner fails to ignite:

Check that the burner is dry and that spillage of food

or cleaning fluid remains are not affecting the ignitor

or burner ports.

Clean away any debris with a dry nylon brush such as

an old toothbrush. If a wire wool pad has been used

for cleaning around the burner ensure the ignitor is

free from any stray strands. Any water on the burner

should be dried with a cloth or kitchen towel.

Make sure that all the burner parts are correctly

seated.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Pas de commentaire

Hotpoint EG72 Manuel d'utilisateur Page 22