Hotpoint SE1002X Manuel d'utilisateur télécharger pdf (Page 13)

To assemble the sliding racks:

1. Loosen the two

screws A (see diagram).

If the oven is fitted with

self-cleaning panels,

these will have to be

temporarily

disassembled.

2. Replace the screws A with the screws and

spacers (B + C) supplied with the kit.

3. Tighten the new screws B and the

corresponding spacers C, fitting the self-cleaning

panels on again.

4. Secure the two joints

D of the guide rail in the

holes provided on the

oven walls (see

diagram). The holes for

the left guide rail are

situated at the top, while

the holes for the right

one are at the bottom.

5. Finally, fit the guide rail on the spacer C.

Sliding Rack Kit assembly

1 2 ... 8 9 10 11 12 13 14 15 16

Pas de commentaire

Hotpoint SE1002X Manuel d'utilisateur Page 13