Hotpoint SE48R1012GX Manuel d'utilisateur télécharger pdf (Page 14)

Sliding rack kit assembly

To assemble the sliding racks:

1. Remove the two

frames, lifting them

away from the spacers

A (see figure).

2. Choose which shelf

to use with the sliding

rack. Paying attention

to the direction in which

the sliding rack is to be

extracted, position joint

B and then joint C on

the frame.

3. Secure the two

frames with the guide

rails using the holes

provided on the oven

walls (see diagram).

The holes for the left

frame are situated at

the top, while the holes

for the right frame are

at the bottom.

4. Finally, fit the frames on the spacers A.

 Do not place the sliding racks in position 5.

Left

guide rail

Right guide

rail

Direction

of extraction

Assistance

Warning:

The appliance is fitted with an automatic diagnostic

system which detects any malfunctions.

Malfunctions are displayed by messages of the

following type: ER followed by numbers.

Call for technical assistance if a malfunction occurs.

Before calling for Assistance:

 Check whether you can fix the problem yourself.

 Restart the programme to check whether the

malfunction has disappeared.

 If it has not, contact the Authorised Technical

Assistance Service.

 Never use the services of an unauthorised

technician.

Please have the following information to hand:

 The message shown on the TEMPERATURE

display.

 The appliance model (Mod.).

 The serial number (S/N).

The latter two pieces of information can be found on

the data plate located on the appliance.

1 2 ... 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Hotpoint SE48R1012GX Manuel d'utilisateur Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Four Hotpoint SE48R1012GX