Hotpoint ACWT 5V331/IX Mode d'emploi télécharger pdf (Page 31)

40°

4.Press the two buttons on the upper profile and

extract the profile (see photo)

5.Remove the glass sheet and do the cleaning as

indicated in chapter: "Care and maintenance".

6.Replace the glass.

WARNING! Oven must not be operated with inner

door glass removed!

WARNING! When reassembling the inner door

glass insert the glass panel correctly so that the

text written on the panel is not reversed and

can be easily legible.

Removing and fitting the oven door:

1.Open the door

2.Make the hinge clamps of the oven door rotate

backwards completely (see photo)

3.Close the door until the clamps stop (the door will

remain open for 40° approx.) (see photo)

7.Replace the profile, a click will indicate that the

part is positioned correctly.

8.Open the door completely.

9.Close the supports (see photo).

10.Now the door can be completely closed and the

oven can be started for normal use.

Side and rear catalytic liners

These are panels coated with a special enamel,

which is able to absorb the fat released by food

as it cooks. This enamel is quite strong, so that

the various accessories (racks, dripping pans, etc.)

can slide along them without damaging them.

White marks may appear on the surfaces; these

are not a cause for concern. Nevertheless, the

following should be avoided:

- scraping the enamel with sharp objects (a knife,

for example);

- using detergents or abrasive materials.

Side and rear catalytic liners

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 67 68

Pas de commentaire

Hotpoint ACWT 5V331/IX Mode d'emploi Page 31