Hotpoint EG600P (T) Mode d'emploi télécharger pdf (Page 11)

Automatic cleaning with the fast clean function

• Once the oven door has been locked, you cannot make

any changes to the cycle time and cycle end settings.

• If the temperature in appliance’s electrical component

area has reached a safe value, it is not possible to

start the “Fast clean” cycle. The word “HOT” will appear

on the display. Wait for the cooling fan to switch off

before restarting the “Fast clean” programme.

What happens at the end of an automatic cleaning

cycle?

At the end of the automatic cleaning cycle, the word “end”

is displayed and an acoustic signal is sounded, which can

be silenced just by pressing any one of the buttons. Turn

knob “L” to the “0” setting and the word “end” will disappear.

To open the oven door, you will have to wait until the tem-

perature inside it has dropped to a suitable value.

You will notice some white dust deposits on the bottom and

sides of your oven; remove them with a damp sponge once

the oven has cooled down completely.

You may on the other hand prefer to take advantage of the

heat accumulated to start cooking immediately; in this case

the dust can stay where it is: it is completely harmless and

will not affect your food in any way.

Warning: to maximise the efficiency and life of the

appliance, we recommend that automatic clean is carried

out with the hob off.

Fast clean programming

The fast clean cycle time and/or cycle end time can be

programmed after selecting the fast clean mode, and within

the 10 first minutes of operation..

Programming the fast clean cycle time

Press button “4” and then adjust the cooking time by press-

ing keys

and

. Press the “4” button to store the

setting. The time left until the end of the fast clean cycle

will be displayed.

Once this time is up, the word «end» will be displayed and

a sequence of acoustic signals will be sounded to indicate

that the cleaning cycle is complete.

• Press any button to silence the acoustic signal.

• Turn knob “L” back to position 0 to remove the word

«end» from the display.

For example

It is 9:00 a.m. and a fast clean cycle time of 1 hour and 15

minutes is programmed. The fast clean cycle will end

automatically at 10:15 a.m..

Cooking time

= 1h15

Manual

start

Automatic stop

Time

Programming the fast clean cycle end time

Press button “3” and then adjust by pressing keys

and

. Press the “3” button to store the setting. The time

left until the end of the fast clean cycle will be displayed.

When the previously selected fast clean cycle time is up,

the word «end» will be displayed and a sequence of acoustic

signals will be sounded to indicate that the fast-clean mode

is complete.

• Press any button to silence the acoustic signal.

• Turn knob “L” back to position 0 to remove the word

«end» from the display.

For example

It is 9:00 a.m. and the fast clean cycle end time is set at

10:15 a.m.. Fast clean will last 1 hour and 15 minutes.

Cooking time

= 1h15

Manual

start

Automatic stop

Time

Delayed fast clean cycle programming

Press button “4” and then adjust the cooking time by press-

ing keys

and

. Press the”4" button to store the

setting and display it.

Press button “3” and then adjust end cooking time by press-

ing keys

and

. Press the”3" button to store the

setting and the display will remind you of the end cooking

time and of the temperature set alternately.

For example

It is 9:00 a.m. and a fast clean cycle time of 1 hour and 15

minutes and 12:20 as the cycle end time are programmed.

The fast clean cycle will start automatically at 11:15 a.m..

12h30

Cooking time

= 1h15 and

end cooking

time set at

12.30 p.m.

9h00 10h00 11h00 12h00

11h15

Automatic

start

Programmed end

The icon A will remind you that you have programmed the

fast clean cycle time and/or the cycle end time.

To cancel a programmed time

To cancel any programming you have made, set knob “L”

to position “0”.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

Hotpoint EG600P (T) Mode d'emploi Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Fours Hotpoint EG600P (T)