Hotpoint OK 999EL D P X AUS S Mode d'emploi Page 19

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 20
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 18
AUS
19
Automatic cleaning with the FAST CLEAN
function
WiththeFASTCLEANmode,theinternaltemperatureofthe
oven reaches 500°C. The pyrolytic cycle is activated, burning
away food and grime residues. Dirt is literally incinerated.
Keep children away from the appliance during the automatic
cleaning cycle as surfaces may become very hot. Particles
may ignite inside the oven as a result of the combustion
process. There is no cause for concern: this process is both
normal and hazard-free.
BeforeinitiatingtheFASTCLEANmode:
• cleantheovendoor;
• removelargeorcoarsefoodresiduesfromtheinsideof
theovenusingadampsponge.Donotusedetergents;
• removeallaccessoriesandtheslidingrackkit(where
present);
• do not place tea towels or pot holders over the oven
handle.
! If the oven is too hot, the pyrolytic cycle may not start.
Wait for the oven to cool down.
! The programme may only be started once the oven door
has been closed.
ThedesiredFastCleanmodewillbeconrmedandstarted
automatically if the CLOCK icon button is not pressed within
10 seconds from selecting the cooking time
ToactivatetheFastCleanprogramme:
1. Switch the control panel on by pressing the icon.
2. Press the icon;thedisplaywillshowthetext“Piro”,
“nor” and the default duration of 1:30 h (normal cycle)
alternately.
3. Press the
icon,thenturntheTIMERknobtoadjust
the default cleaning level. There are 3 different levels to
choose from, each with a pre-set duration which cannot
bemodied:
1. Economy (ECO): turn the knob towards “-”.Duration1
hour.
2. Normal (NOR): initial level. Duration 1 hour and 30
minutes.
3. Intensive (INT): turn the knob towards “+”.Duration 2
hours.
4. Press the
icontoconrm.
5. Press the icon to begin the cleaning cycle.
AnendtimefortheFASTCLEANcycle(asforanormal
cooking cycle) may be programmed (see Programming the
automatic cleaning end time).
Safety devices
• thedoorlocksautomaticallyassoonasthetemperature
reaches a high value; the icon lights up on the
display;
• pressingthe icon cancels the cleaning cycle at any
time;
• if a malfunction occurs, the heating elements will be
switchedoff;
• oncetheovendoorhasbeenlocked,youcannotchange
the duration and end time settings.
Programming the automatic cleaning end time
1. Press the
icon twice: the icon and the numerical
digitsonthedisplaywillbegintoash.
2. Turn the TIMER knob towards and to adjust the
cleaning end time value.
3. Once you have reached the desired end time, press
the
icon again. The display will show the duration, the
cleaning end time and the set cleaning level alternately.
4. Press the
icon to activate the programmed mode.
Programming has been set when the and buttons
are illuminated.
5.Oncecleaninghasnished,“END”appearsonthedisplay
and a buzzer sounds.
• For example: itis9:00a.m. and the Economy (ECO)
FASTCLEANlevelhasbeenselected,withthedefault
duration of 1 hour. 12:30 is scheduled as the end time.
The programme will start automatically at 11:30 a.m.
To cancel programming press the
icon.
Once the automatic cleaning cycle is over
Before you can open the oven door, you will have to wait
for the
icon to switch off: this indicates the oven
temperature has dropped to an acceptable level. You will
notice some white dust deposits on the bottom and the sides
ofyouroven;removethesedepositswithadampsponge
once the oven has cooled down completely. Alternatively,
you can make use of the already heated oven, in which
case it is not necessary to remove the deposits, they are
completely harmless and will not affect your food in any way.
Vue de la page 18
1 2 ... 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire