Hotpoint OT 857 A RFH Mode d'emploi télécharger pdf (Page 10)

Select the desired cooking mode using the SELECTOR knob.

The oven switches on immediately and switches off at the set end of cooking

time.

To view the set programme, briey press and release the knob; the pointers

and icons will display the set programme.

At the end of cooking, the END OF COOKING icon ashes and the alarm

sounds for 1 minute (to silence it, briey press the knob).

Turn the SELECTOR knob to the “0” position.

• For example: it is 9:00 and the cooking end time is set to 10:15. The

programme begins immediately and stops automatically at 10:15, with a

duration of 1 hour 15 minutes.

Programming a cooking duration with delayed start

Programming the cooking start time makes it possible to end cooking

automatically in accordance with the programmed time.

To programme the cooking start time, briey press the knob once until the

START OF COOKING icon begins to ash.

To increase or decrease the cooking start time in steps of 1 minute, turn the

knob clockwise or anticlockwise; the minutes pointer moves clockwise or

anticlockwise accordingly, in steps of 1 minute.

The START OF COOKING icon ashes continuously for 10 seconds after the

most recent rotation. If the knob is not turned or pressed within this period,

the pointers automatically revert to displaying the time and the programme

is cancelled. After setting the cooking start time (START OF COOKING icon

lit steadily), pressing the knob again will begin the cooking end time setting

process (the END OF COOKING icon begins to ash), as long as at least

one minute has been programmed; otherwise the programming will be lost.

To programme the cooking end time, follow the above instructions.

Select the desired cooking mode using the SELECTOR knob. The oven

will switch on at the set start time and will switch off at the selected cooking

end time.

• For example: it is 9:00, the cooking start time is set to 11:00 and the cooking

end time is set to 12:15. The programme begins automatically at 11:00

and stops at 12:15, with a duration of 1 hour 15 minutes.

! To cancel a programme, press and hold the knob for 3 seconds: programming

will be cancelled and the programmer will revert to manual cooking mode.

Modes

! A temperature value can be set for all cooking modes between 60°C and

Max, except for

• BARBECUE (recommended: set only to MAX power level);

• GRATIN (recommended: do not exceed 200°C).

TRADITIONAL OVEN mode

When using this traditional cooking mode, it is best to use one cooking rack

only; if more than one rack is used, the heat will be distributed unevenly.

BAKING mode

This mode is ideal for baking and cooking temperature sensitive foods

such as cakes that need to rise and to prepare certain tartlets on 3 shelves

simultaneously.

FAST COOKING mode

This mode is especially recommended for cooking pre-packed food quickly

(frozen or pre-cooked). The best results are obtained if you use one cooking

rack only.

MULTI-COOKING mode

Since the heat remains constant throughout the oven, the air cooks and

browns food uniformly. A maximum of two racks may be used at the same time.

PIZZA mode

This combination heats the oven rapidly by producing a considerable amount

of heat, particularly from the bottom element. If you use more than one rack

simultaneously, switch the position of the dishes halfway through the cooking

process.

BARBECUE mode

The high and direct temperature of the grill is recommended for dishes that

require a high temperature on the surface. Always cook in this mode with the

oven door closed.

GRATIN mode

This combination of features increases the effectiveness of the unidirectional

thermal radiation of the heating elements through forced circulation of the air

throughout the oven. This helps prevent food from burning on the surface,

allowing the heat to penetrate right into the food. Always cook in this mode

with the oven door closed.

Planning your cooking

Programming cooking time with immediate start

1. Turn the PROGRAMMER knob in an anticlockwise direction until the desired

cooking time is displayed.

2. Pull the PROGRAMMER knob and turn it in an anticlockwise direction until

the marker corresponds with the current time. A click will indicate the end of

the programming phase.

3. Select the desired cooking mode using the SELECTOR knob. The oven

switches on immediately and remains on for the entire duration of the set

cooking time.

4. When the set time has elapsed, a buzzer will sound. To stop the cooking

process, turn the PROGRAMMER knob in an anticlockwise direction until

the symbol “ ” is displayed.

5. Turn the SELECTOR knob to the “0” position.

• For example: it is 9:00 a.m. and a time of 1 hour and 15 minutes is

programmed. The programme will stop automatically at 10:15 a.m.

Programming a delayed cooking time

1. Turn the PROGRAMMER knob in an anticlockwise direction until the desired

cooking time is displayed.

2. Pull the PROGRAMMER knob and turn it in an anticlockwise direction until

the marker corresponds with the desired cooking start time.

3. Select the desired cooking mode using the SELECTOR knob. The oven

will switch on at the set cooking start time and will remain on for the entire

duration of the set cooking time.

4. When the set time has elapsed, a buzzer will sound. To stop the cooking

process, turn the PROGRAMMER knob in an anticlockwise direction until

the symbol “ ” is displayed.

5. Turn the SELECTOR knob to the “0” position.

• For example: it is 9:00 a.m., a time of 1 hour and 15 minutes is

programmed and the start time is set to 11:00 a.m. The programme will

start automatically at 11:00 and will end at 12:15.

! To cancel programming, turn the PROGRAMMER knob anticlockwise until

the symbol “ ” is displayed.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Hotpoint OT 857 A RFH Mode d'emploi Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Fours Hotpoint OT 857 A RFH