Hotpoint SH 103 CX Mode d'emploi télécharger pdf (Page 8)

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

Programming cooking

! A cooking mode must be selected before

programming can take place.

Programming the duration

1. Press the

; button; the button and the

numbers on the TIME display will flash.

2. To set the duration, press buttons "+" and "-";

press and hold to scroll the numbers quicker and

make setting easier.

3. Once the desired duration setting is reached, wait

10 seconds for the selection to be memorized, or

press button

again to fix the setting.

4. When the set time has elapsed, END appears on

the TEMPERATURE display and a buzzer sounds.

• For example: it is 9:00 a.m. and a time of 1 hour

and 15 minutes is programmed. The programme

will stop automatically at 10:15 a.m.

Programming delayed cooking

1. Press the

button and repeat steps 1 to 3 as

described for the duration setting.

2. Then press the

button and set the end of

cooking time by pressing buttons "+" and "-"; press

and hold to scroll the numbers quicker and make

setting easier.

3. Once the end of cooking time is reached, wait 10

seconds for the selection to be memorized, or press

the

button again to fix the setting.

4. Press the “START” button to confirm the

programming process.

5. When the selected time has elapsed, END appears

on the TEMPERATURE display and a buzzer sounds.

• For example: it is 9:00 a.m. and a time of 1 hour

and 15 minutes is programmed and the end time

is set to 12:30. The programme will start

automatically at 11:15 a.m.

The

and buttons will flash signalling that the

programmed mode has been set. After

programming, in the time before cooking starts, the

TIME display indicates the duration and end of

cooking time alternately.

To cancel a programming procedure press the

"STOP" button.

! When selecting a cooking mode, the

button is

activated whereas the

button is not. When setting

the cooking time, the

button is illuminated and

delayed cooking can be programmed.

Practical cooking advice

! Do not place racks in position 1 and 5 during fan-

assisted cooking. This is because excessive direct

heat can burn temperature sensitive foods.

! In the BARBECUE and GRATIN cooking modes,

particularly when using the rotisserie spit, place the

dripping pan in position 1 to collect cooking

residues (fat and/or grease).

MULTILEVEL

• Use positions 2 and 4, placing the food which

requires more heat on 2.

• Place the dripping pan on the bottom and the rack

on top.

BARBECUE

• Place the grill rack in position 3 or 4 and place

the food in the centre of the rack.

• We recommend that the power level is set to

maximum. The top heating element is regulated

by a thermostat and may not always operate

constantly.

PIZZA

• Use a light aluminium pizza pan. Place it on the

rack provided.

For a crispy crust, do not use the dripping pan as

it prevents the crust from forming by extending

the total cooking time.

• If the pizza has a lot of toppings, we recommend

adding the mozzarella cheese on top of the pizza

halfway through the cooking process.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Hotpoint SH 103 CX Mode d'emploi Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Fours Hotpoint SH 103 CX