10
GB
How to carry out
a drying cycle
Starting and selecting a programme
1. Plug the dryer into the power supply socket.
2. Sort your laundry according to fabric type (see Laundry).
3. Open the door, ensure that the filter is clean and securely placed and that the water container is empty and correctly located (see
Care and maintenance).
4. Load the machine, making sure that no piece of laundry gets between the door and the relative seal. Close the door.
5. Turn on the dryer by moving the knob to a position other than OFF.
6. After consulting the programme chart and the indications for each type of fabric (see Laundry), turn the Programme selection
knob towards the programme corresponding to the type of laundry to be dried (see Programmes and options).
! Warning: If the position of the programme selection knob changes after pressing the START/PAUSE button, the selected
programme will NOT be modified. To modify the programme, press the START/PAUSE button to put the programme in pause mode
(the indicator light flashes orange), then select a new programme and the relative options. Press the START/PAUSE button to start
the new programme.
7. If necessary, set options (see Programmes and options).
8. Press the START/PAUSE button to start the drying cycle.
Laundry can be checked while the drying programme runs and any garments already dry can be removed, while drying continues
for the remaining items. After closing the door, press the START/PAUSE button to resume machine operation.
9. The final COOL TUMBLE phase (i.e. the fabrics are cooled) activates during the last few minutes of the drying programme; always
allow this phase to terminate.
10. When the END indicator light turns on, the programme has ended. The buzzer will beep 3 times to let you know that your
programme is complete. Open the door, remove the laundry then clean the filter and replace it. Empty the water container and put it
back in its slot (see Care and maintenance).
If the clothes are not removed at the end of the cycle the automatic ANTI CREASE action will, on those programmes with this
feature, continue to rotate the drum intermittently for up to 10 hours to minimise creasing. The phase is stopped when the door is
opened or when the knob is set to OFF
11. Set the program knob to OFF to switch off the machine.
12. Disconnect the dryer from the power supply.
Automatic Anti Crease
This is an automatic function which provides an anti crease treatment after the drying programme. By periodically rotating the drum
before the start of the drying cycle. On certain programmes the drum also rotates periodically at the end of the drying cycle on. The
phase is stopped when the door is opened or when the knob is set to OFF
Stand-by mode
This tumble dryer, in compliance with new energy saving regulations, is fitted with an automatic standby system which is enabled
after about 30 minutes if no activity is detected.
Turn the knob to the desired program to restart dryer operation (to start the program press START/PAUSE). The OFF position
switches off the dryer.
(16 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels