Hotpoint STCL 408W B(UK) Mode d'emploi télécharger pdf (Page 9)

Programme selection knob

Allows for setting the programme: turn until the indicator points towards the desired programme.

The OFF position switches off the

dryer. (see Starting and selecting a programme).

Options buttons

Allow for selecting the options available for the selected programme. The relative indicator lights turn on when the option has been

selected (see Programmes and options).

START/PAUSE button and indicator light

When the green light flashes slowly, press the button to start the programme. When the cycle is under way, the indicator light remains

on. To put the programme into pause mode, press the button again; the indicator light will turn orange and start flashing again.

To resume the programme from the point it was interrupted, press the button again (see Start and programme selection).

Indicator lights

“Maintenance” indicator lights

The indicator lights provide important information. They indicate the following:

Before each programme, the indicators light CLEAN FILTER and EMPTY WATER signals that it is essential to clean the filter and

the water container must be emptied, before using the tumble dryer (see Care and maintenance).

If the water container fills during the course of the programme, the LED lights up. The water container must be emptied before pressing

the START/PAUSE button to resume the cycle from the point it was interrupted.

The “Clean condenser unit” indicator light (CLEAN CONDENSER) signals that it is essential to clean the condenser regularly (see Care

and maintenance).

“Drying phases” indicator lights

The DRYING indicator light signals that the drying phase is running.

The REFRESH indicator light signals th

at the cooling phase is running.

The END indicator light signals that the programme has ended.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Hotpoint STCL 408W B(UK) Mode d'emploi Page 9