8
GB
Control panel
PROGRAMMES
Knob
Indicator
ON/OFF
Button
OPTION
Buttons & Lights
START/PAUSE
Button & Light
Empty Water
Light
Clean Filter
Light
Clean Condenser
Light
Progress or Delay
Lights
ON/OFF/Reset button
Pressing the button normally will cause the machine to switch
on or off. If the button is pressed for 3 seconds while the dryer
is in function, the machine will switch off and the running cycle
will reset.
Programme selection knob
Allows for setting the programme: turn until the indicator points
towards the desired programme (see Starting and selecting
a programme).
Options buttons
Allow for selecting the options available for the selected pro-
gramme. The relative indicator lights turn on when the option
has been selected (see Programmes and options).
START/PAUSE button and indicator light
When the green light flashes slowly, press the button to start
the programme. When the cycle is under way, the indicator
light remains on. To put the programme into pause mode,
press the button again; the indicator light will turn and start
flashing again.
To resume the programme from the point it was interrupted,
press the button again (see Start and programme selection).
Indicator lights
“Maintenance” indicator lights
The indicator lights provide important information. They indi-
cate the following:
The “Empty water container” indicator light signals that the
water container must be emptied.
If the water container fills during the course of the programme,
the LED lights up. The dryer automatically starts a COOL
TUMBLE cycle and the START/PAUSE LED flashes orange.
Press the START/PAUSE button to resume the cycle from the
point it was interrupted.
In order to avoid this procedure, always empty the water con-
tainer after using the tumble dryer (see Care and maintenance).
Before each programme, the “Clean filter” indicator light
signals that it is essential to clean the filter each time before
using the tumble dryer (see Care and maintenance).
CARE LABEL
Always check the care labels, especially when placing garments in
the tumble dryer for the rst time. Below are the most commonly
used symbols:
May be tumble dried.
Do not tumble dry.
Tumble dry – high heat.
Tumble dry – low heat.
The “Clean condenser unit” indicator light signals that it is essential to
clean the condenser regularly (see Care and maintenance).
“Drying phases” indicator lights
The indicator light signals that the drying phase is running.
The indicator light signals that the cooling phase is running.
The END indicator light signals that the programme has ended.
“Delay timer” indicator light
If the ”Delay timer” option has been activated (see “Programmes and
options”), after the programme has started, the indicator light corre-
sponding to the chosen delay time will start flashing:
As time passes, the remaining delay will be displayed and the corre-
sponding indicator light will flash:
Once the set delay time ends, the flashing LED will turn off and the set
programme will start.
(12 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels