Hotpoint BL31 Manuel d'utilisateur télécharger pdf (Page 2)

Your New Integrated Appliance

Using your new integrated appliance is very simple.Nevertheless,to get the best results it is

important that you read right through this handbook before using your integrated appliance

for the first time.

Electrical Requirements

WARNING: This appliance must be earthed.

Fuses

Your appliance comes fitted with a plug and a 13A fuse.If you need to replace the fuse,only

those rated at 13A and ASTA approved to BS1362 should be used.If you lose the fuse cover,

a replacement may be obtained from your local authorised Service Centre or Electricity

company.Correct replacement is identified by colour coding or the marking on base of

plug.

WARNING: Do not use plug unless fuse cover is fitted.

Changing the Plug

Cut off and dispose of the supplied plug if it does not fit your socket.

WARNING: To avoid a shock hazard do not insert the discarded plug into a socket

anywhere else.

IMPORTANT:WIRES IN THE MAINS

LEAD ARE COLOURED IN

ACCORDANCE WITH THE

FOLLOWING CODE:

Green/Yellow - Earth

Blue - Neutral

Brown - Live

If you change the plug,the colour of

wires in the mains lead may not

correspond with the colour of the

markings identifying terminals in the

plug.You should therefore wire it as

shown.

Changing the Mains

Lead

A special lead can be ordered from our Service Department UK:08709 066 066 or

Republic of Ireland:1850 302 220

If you have damaged the existing lead or require a longer one a charge will be made.It is

strongly advised that this work is carried out by a qualified electrician.

CE marking certifies that this appliance conforms to the following EEC directives:-

Low Voltage Equipment - 72/23/EEC & 93/68 EEC

Electromagnetic Compatibility - 89/336/EEC,92/31/EEC & 93/68/EEC

Green and yellow (Earth)

wire to terminal

marked ‘E’,

symboL, or

coloured green

and yellow.

Blue (Neutral)

wire to terminal

marked ‘N’ or

coloured black.

13A ASTAapproved

fuse to BS1362.

Brown (Live)

wire to terminal

marked ‘L’ or

coloured red.

Cord clamp

WARNING:AVOID ACCIDENTS TO CHILDREN.WHEN DISCARDING AN OLD FRIDGE OR

FREEZER BE CERTAIN TO MAKE THE LOCK UNUSABLE.IF POSSIBLE,REMOVE THE DOOR

AND DISCARD SEPERATELY.

DO NOT ATTEMPT TO SIT ON TOP OF YOUR APPLIANCE.IT IS NOT DESIGNED FOR SUCH

USE AND YOU COULD INJURE YOURSELF OR DAMAGE THE APPLIANCE BY SUCH ABUSE.

1 2 3 4 5 6 7 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

Hotpoint BL31 Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Non Hotpoint BL31