Hotpoint C60ETC Mode d'emploi télécharger pdf (Page 17)

USING THE

CERAMIC HOB

WARNING: DO NOT USE THE HOB IF IT IS CRACKED. TO AVOID ELECTRIC SHOCK - SWITCH

OFF AT THE COOKER MAINS CONTROL SWITCH IMMEDIATELY AND CONTACT YOUR

NEAREST SERVICE OFFICE (see back page).



   

Solarglo

1200 W

145mm diameter

Solarglo (Dual Oval)

1500 W

145mm x 250mm diameter

Solarglo

1800 W

180mm diameter

Solarglo

1200 W

145mm diameter

The Working of the Heating Zones

Heating only occurs within the marked circular cooking zones. The zones heat up and

cool down quicker, providing greater controllability for sensitive foods. Each heating

zone is equipped with a thermal limiter which is a safety cut-out which prevents the

ceramic glass from overheating. After several minutes at full power without a pan on

the heating zone the thermal limiter will switch the heating elements off and on

automatically to avoid any damage to the ceramic glass.

Choice of Saucepans

It is essential that the saucepan's you use on the ceramic hob are suitable.

ALWAYS USE:

• Good quality pans with smooth, flat, heavy bases.

• saucepan's manufactured from aluminium (enamelled or machined) or stainless

steel.

• Correct size saucepan's. The base of the pan must cover the heating zone

completely.

• saucepan's with lids which are well fitting to reduce cooking time and energy use.

NEVER USE:

• Pans with thin, distorted or uneven bases as these will extend cooking times, waste

electricity and cause damaging, local hotspots on the glass surface.

• Pans with ridged or recessed bases.

• Pans with damaged or rough bases which could scratch the glass surface.

• Glass or glass ceramic utensils.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

Pas de commentaire

Hotpoint C60ETC Mode d'emploi Page 17