Hotpoint DE47X Mode d'emploi télécharger pdf (Page 12)

Electronic Clock & Automatic

Oven Timer Operation

SETTING THE TIME OF DAY

Step 1 Make sure all oven

controls are turned Off.

Step 2 Check the electricity

supply to the cooker is turned on.

Step 3 When switched on the

display will show 0.00 and the

Auto symbol, flashing

intermittently.

Step 4 Press & hold in both the

Cook Period & End Time buttons

together.

Step 5 With the Cook Period &

End Time buttons still held in,

press either the "+" or "-" buttons

to set the correct time of day.

Step 6 Release all the buttons simultaneously.

THE TIME OF DAY IS NOW SET.

To change the time of day repeat Steps 4, 5 & 6 above.

Note: You cannot adjust the time of day if the timer

has been set for an Auto Cooking Programme.

SETTING THE MINUTE MINDER

Step 1 Ensure the time of day

is set correctly.

Step 2 Press and hold the

Minute Minder button.

Step 3 With the Minute Minder

button held in, set the required

Minute Minder period using the

"+" and "-" buttons. A 'bell'

symbol will light up.

Release all buttons and the timer display will revert

back to the time of day. The 'bell' symbol will remain lit

to signify that a Minute Minder period has been set.

At the end of the set time an audible tone will be

heard, and the 'bell' symbol will disappear.

Step 4 To cancel the audible

tone press the Minute Minder

button.

Note 1 When the Minute Minder has been set, the time

remaining can be checked at any time by

simply pressing the Minute Minder button.

Note 2 If necessary the Minute Minder can be

cancelled before the tone sounds by pressing

and holding the Minute Minder button and then

at the same time pressing the "-" button until

0.00 appears in the display window.

AUTO COOKING PROGRAMMES

There are two Auto Cooking programmes that can be

selected using your timer:-

(a) To set the timer to switch the oven(s) On and Off

Automatically

(b) To set timer to switch on immediately and OFF

automatically after a set cook period.

a) TO SET THE TIMER TO SWITCH THE

OVEN(S) ON AND OFF AUTOMATICALLY

This allows you to cook at a specified time for a

chosen period before the oven switches off

Automatically.

Step 1 Check that the correct time of day is set, if

not follow instructions for setting the time

of day.

Step 2 Place food onto the correct shelf position

in the oven and close the oven door(s).

Step 3 Press and hold in the

Cook Period button. The display

will read 0.00 with the 'cookpot'

symbol lit.

Step 4 With the Cook Period

button still held in, set the

required Cook Period using the

"+" and "-" buttons.

Release the buttons and the

timer display will revert to the

time of day with the 'Auto'

symbol and 'cookpot' symbol lit.

Step 5 Press and hold in the

End Time button. The display

will read the earliest possible

end time for the Cook Period that

you have set above. The 'Auto'

symbol and 'cookpot' symbol

will be lit.

Step 6 With the End Time

button still held in, use the "+"

and "-" buttons to set the 'End

Time' (i.e. The time you require

the oven to switch off ).

Release all the buttons and the timer will revert back

to the time of day.

The 'Auto' symbol will remain lit

to signify that an Auto Cooking

Programme has been set. The

'cookpot' symbol will go out.

Step 7 Turn the oven control(s) to the required tem-

perature, and if necessary select the

appropriate oven function.

000

4120

6120

4120

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

Hotpoint DE47X Mode d'emploi Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Non Hotpoint DE47X