Hotpoint DK 14 K UK Mode d'emploi télécharger pdf (Page 4)

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

Installation

Before operating your new appliance please read this instruction booklet

carefully. It contains important information concerning the safe operation,

installation and maintenance of the appliance.

! Please keep these operating instructions for future reference. Make sure that

the instructions are kept with the appliance if it is sold, given away or moved.

Positioning

! Keep all packaging material out of the reach of children. It may present a

choking or suffocation hazard (see Precautions and tips).

! The appliance must be installed by a qualied person in compliance with

the instructions provided. Incorrect installation may cause harm to people and

animals or may damage property.

! A set of spacers is included in the packaging; this can be used to achieve

optimal alignment between the drawer and the appliances with which it can

be combined during installation.

For further information regarding installation, please read the technical

documentation supplied with the appliance.

Oven above - drawer below (see gure)

* cupboard dimensions

1 - insert the drawer

2 - put the brackets on the drawer and secure to the cupboard with the 3 screws

3 - open the drawer and place the oven on the brackets

4 - align oven and drawer and secure the oven using the screws provided

5 - secure the drawer to the cupboard

Electrical Connection

! The compartment tted with a three-pole power supply cable is designed to

operate with an alternating current at the voltage and frequency indicated on

the data plate located on the appliance (see below).

Connecting the supply cable to the mains

The appliance must be directly connected to the mains using an omnipolar circuit-

breaker with a minimum contact opening of 3 mm installed between the appliance

and the mains. The circuit-breaker must be suitable for the charge indicated and

must comply with current electrical regulations (the earthing wire must not be

interrupted by the circuit-breaker). The supply cable must be positioned so that

it does not come into contact with temperatures higher than 50°C at any point.

! The installer must ensure that the correct electrical connection has been

made and that it is fully compliant with safety regulations.

Before connecting the appliance to the power supply, make sure that:

• The appliance is earthed and the plug is compliant with the law.

• The socket can withstand the maximum power of the appliance, which is

indicated on the data plate (see below).

• The voltage is in the range between the values indicated on the data plate

(see below).

• The socket is compatible with the plug of the appliance. If the socket is

incompatible with the plug, ask an authorised technician to replace it. Do

not use extension cords or multiple sockets.

! Once the appliance has been installed, the power supply cable and the

electrical socket must be easily accessible.

! The cable must not be bent or compressed.

TABLE OF CHARACTERISTICS

Dimensions

width 50.5 cm

height 7.29 cm

depth 45.5 cm

Volume

16.5 l

Maximum

capacity

20 kg

Electrical

connections

voltage at 230-240V~

50/60Hz maximum power

absorbed 85W

This appliance conforms to

the following European

Economic Community

directives:

2006/95/EEC dated

12/12/06 (Low Voltage) and

subsequent amendments;

2004/108/EEC dated

15/12/04 (Electromagnetic

Compatibility) and

subsequent amendments;

93/68/EEC dated 22/07/93

and subsequent

amendments.

2002/96/EEC and

subsequent amendments.

1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire

Hotpoint DK 14 K UK Mode d'emploi Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Non Hotpoint DK 14 K UK