Hotpoint FA 55Y4 IX Guide de l'utilisateur télécharger pdf (Page 3)

1. SETTING THE TIME

You will need to set the time when you switch on the

appliance for the first time: “AUTO” and “0.00” flash on

the display.

To set the time of day, press buttons and at the

same time: Set the time of day using the

and

buttons.

Please note: To change the time of the day afterwards (for

example following lengthy power outages) you will need

to reset the time by pressing buttons and at the same

time.

2. SETTING THE TONE

Having selected the desired time value, press the time

button: The display shows “ton 1”.

To select the desired tone, press button , then press

the time button to confirm.

Please note: To change settings afterwards, press buttons

and at the same time and repeat the operations above.

3. HEAT THE OVEN

A new oven may release odours that have been left

behind during manufacturing: this is completely

normal.

Before starting to cook food, we therefore

recommend heating the oven with it empty in order

to remove any possible odours.

Remove any protective cardboard or transparent film

from the oven and remove any accessories from inside

it.

Heat the oven to 250 °C for about one hour,

preferably using the “Convection Bake” function. The

oven must be empty during this time.

Follow the instructions for setting the function

correctly.

Please note: It is advisable to air the room after using the

appliance for the rst time.

USING THE APPLIANCE FOR THE FIRST TIME

1. SELECT A FUNCTION

To select a function, turn the selection knob to the

symbol for the function you require.

2. ACTIVATE A FUNCTION

To start the function you have selected, turn the

thermostat knob to set the temperature you require.

To interrupt the function at any time, switch off the

oven, turn the selection knob and the thermostat knob

and .

3. PREHEATING

Once the function has been activated, the LED

thermostat will switch on signalling that the

preheating process has begun.

At the end of this process, the LED thermostat

switches off indicating that the oven has reached the

set temperature: at this point, place the food inside

and proceed with cooking.

Please note: Placing the food in the oven before preheating

has nished may have an adverse eect on the nal cooking

result.

. PROGRAMMING COOKING

After selecting and activating the function, it is

possible to set the duration.

DURATION

Press for at least 2 seconds the time button: the

symbol flashes.

Press the time button again: the display shows DUR

and 0.00 in sequence while AUTO flashes.

Set the duration using the buttons and . After a

few seconds, the display shows the time of the day

while AUTO

remain lit, confirming the setting.

DAILY USE

1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire

Hotpoint FA 55Y4 IX Guide de l'utilisateur Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Non Hotpoint FA 55Y4 IX