Hotpoint ET 1400 Manuel d'utilisateur télécharger pdf (Page 14)

Care and maintenance

Cutting off the water or electricity

supply

 Turn off the water tap after every wash. This

will limit the wear of your appliance's water

system and also prevent leaks.

 Unplug your appliance when cleaning it and

during all maintenance operations.

Cleaning your appliance

The exterior and rubber parts of your appliance can

be cleaned with a soft cloth soaked in lukewarm

soapy water. Do not use solvents or abrasives.

Caring for your appliance door and drum

 Always leave the appliance door ajar to prevent

unpleasant odours from forming.

Cleaning the pump

The washing machine is fitted with a self-cleaning

pump that does not require any maintenance.

Sometimes, small items (such as coins and buttons)

may fall into the pre-chamber that protects the

pump, situated in the lower part of the same.

 Make sure that the wash cycle has ended and

unplug the appliance.

To access the pre-chamber:

1. remove the cover

panel (in the lower

front of the washing

machine), prizing it on

both sides with a

screwdriver. Do not

force it.

2. unscrew the lid

rotating it in anti-

clockwise. A little

water may trickle out

(about 1 liter). Put a

little container under

the hole.

3. clean the interior

thoroughly.

4. screw the lid back on.

5. reposition the panel, making sure the hooks are

securely in place before you push it onto the appliance.

Checking the water inlet hose

Check the water inlet hose at least once a year. If

you see any cracks, replace it immediately: during

the wash cycles, water pressure is very strong

and a cracked hose could easily split open.

 Never use hoses that have already been used.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire

Hotpoint ET 1400 Manuel d'utilisateur Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Rondelles Hotpoint ET 1400