Hotpoint wdd960 Manuel d'utilisateur télécharger pdf (Page 8)

How to run a wash cycle or a drying

cycle

1. SWITCH THE MACHINE ON. Press the button; the

text HELLO will appear on the display and the START/

PAUSE indicator light will flash slowly in a green colour.

2. LOAD THE LAUNDRY. Open the porthole door. Load

the laundry, making sure you do not exceed the

maximum load value indicated in the table of

programmes on the following page.

3. MEASURE OUT THE DETERGENT. Pull out the

detergent dispenser drawer and pour the detergent

into the relevant compartments as described in

"Detergents and laundry".

4. CLOSE THE DOOR.

5. SELECT THE WASH CYCLE. Press one of the

WASH CYCLE SELECTOR buttons to select the

required wash cycle; the name of the wash cycle will

appear on the display. A temperature and spin speed

is set for each wash cycle; these may be adjusted.

The duration of the cycle will appear on the display.

6. CUSTOMISE THE WASH CYCLE. Use the relevant

buttons:

Modifying the temperature and/or

spin speed. The machine automatically selects the

maximum temperature and spin speed set for the

selected wash cycle; these values cannot therefore be

increased. The temperature can be decreased by

pressing the

button, until the cold wash "OFF" setting

is reached. The spin speed may be progressively

reduced by pressing the

button, until it is completely

excluded (the "OFF" setting). If these buttons are

pressed again, the maximum values are restored.

 Setting a delayed start.

To set a delayed start for the selected programme,

press the corresponding button repeatedly until the

required delay period has been reached. When this

option is enabled, the

symbol lights up on the

display. To remove the delayed start function press

the button until the text "OFF" appears on the display.

 Setting the drying cycle.

The desired drying cycle type may be set by pressing

the DRYING button once or several times. Two

options are available:

A - Based on the how damp the clothes are once they

have been dried:

Iron dry: slightly damp clothes, easy to iron.

Hanger dry: dry clothes to put away.

Cupboard dry: very dry clothes, recommended for

towelling and bathrobes.

B - Based on time: from 40 minutes to 180.

To exclude the drying phase press the relevant button

until the text OFF appears on the display.

If your laundry load to be washed and dried is much

greater than the maximum stated load (see adjacent

table), perform the wash cycle, and when the cycle is

complete, divide the garments into groups and put

some of them back in the drum. At this point, follow

the instructions provided for a "Drying only" cycle.

Repeat this procedure for the remainder of the load.

N.B: a cooling-down period is always added to the

end of each drying cycle.

Drying only

Select a drying setting (

- - ) using the WASH

CYCLE selector in accordance with the type of fabric, then

select the desired drying type using the DRYING button.

Modifying the cycle settings.

 Press the button to enable the function; the

indicator light corresponding to the button will

switch on.

 Press the button again to disable the function; the

indicator light will switch off.

 If the selected function is not compatible with the

programmed wash cycle, the indicator light will flash

and the function will not be activated.

 If the selected function is not compatible with

another function which has been selected previously,

the indicator light corresponding to the first function

selected will flash and only the second function will be

activated; the indicator light corresponding to the

enabled function will remain lit.

 The functions may affect the recommended load

value and/or the duration of the cycle.

7. START THE PROGRAMME. Press the START/

PAUSE button. The corresponding indicator light will

become green, remaining lit in a fixed manner, and

the door will be locked (the DOOR LOCKED symbol

will be on). During the wash cycle, the name of the

phase in progress will appear on the display. To

change a wash cycle while it is in progress, pause the

washer dryer using the START/PAUSE button (the

START/PAUSE indicator light will flash slowly in an

orange colour); then select the desired cycle and

press the START/PAUSE button again.

To open the door while a cycle is in progress, press

the START/PAUSE button; if the DOOR LOCKED

symbol is switched off the door may be opened.

Press the START/PAUSE button again to restart the

wash cycle from the point at which it was interrupted.

8. THE END OF THE WASH CYCLE. This will be

indicated by the text "END OF CYCLE" on the display;

when the DOOR LOCKED

symbol switches off the

door may be opened. Open the door, unload the

laundry and switch off the machine.

If you wish to cancel a cycle which has already begun,

press and hold the

button. The cycle will be stopped

and the machine will switch off.

Fabric

type

Load type Max.

load

(kg)

Cupboard

dry

Henger

dry

Iron

dry

Cotton Clothing of different

sizes, Terry towels

5180170160

Synthe-

tics

Sheets, Shirts, Pyjamas,

socks, etc.

3180170160

Wool Knitwear, Pullovers, etc.

1,5 150 140 130

6able of Drying times (guideline values)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Hotpoint wdd960 Manuel d'utilisateur Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Rondelles Hotpoint wdd960