Hotpoint FML 602 EU Mode d'emploi télécharger pdf (Page 19)

Indicator lights

The indicator lights provide important information.

This is what they can tell you:

Delayed start

IftheDELAYTIMERfunctionhasbeenactivated(see “Per-

sonalisation”), after the wash cycle has been started the

indicator light corresponding to the selected delay period

will begin to flash:

Astimepasses,theremainingdelaywillbedisplayedand

the corresponding indicator light will flash:

Once the set delay has elapsed, the flashing indicator light

will switch off and the selected wash cycle will begin.

Wash cycle phase indicator lights

Once the desired wash cycle has been selected and has

begun, the indicator lights switch on one by one to indicate

which phase of the cycle is currently in progress.

Function buttons and corresponding indicator lights

When a function is selected, the corresponding indicator

light will illuminate.

If the selected function is not compatible with the pro-

grammed wash cycle, the corresponding indicator light will

flash and a sound alert (3 beeps); the function will not be

activated.

If a function which is incompatible with another function

selected previously, only the most recent selection will

remain active.

Door locked indicator light

If this indicator light is on, the appliance door is locked to

prevent it from being opened accidentally; to avoid any

damage, wait for the indicator light to switch off before you

open the appliance door (wait approximately 3 minutes).

N.B. IftheDELAYTIMERfunctionisactivated,thedoor

cannot be opened; pause the machine by pressing the

START/PAUSEbuttonifyouwishtoopenit.

!IftheSTART/PAUSEindicatorlight(orange)flashes

rapidly at the same time as the function indicator light, this

indicates a problem has occurred (see “Troubleshooting”).

Starting a wash cycle

1. TurnthewashingmachineonbypressingtheON/OFFbutton.Alltheindicatorlightswillturnonforafewseconds,thenonly

theindicatorlightsrelativetotheselectedprogrammesettingswillremainlitandtheSTART/PAUSEindicatorlightwillflash.

2. Load the laundry and close the door.

3.SettheWASHCYCLEknobtothedesiredprogramme.

4. Set the washing temperature (see “Personalisation”).

5. Set the spin speed (see “Personalisation”).

6. Measure out the detergent and washing additives (see “Detergents and laundry”).

7. Select the desired functions.

8.StartthewashcyclebypressingtheSTART/PAUSEbuttonandthecorrespondingindicatorlightwillremainlitinafixed

manner, in green.

Tocancelthesetwashcycle,pausethemachinebypressingtheSTART/PAUSEbuttonandselectanewcycle.

9.AttheendofthewashcycletheEND indicator light will switch on. The DOOR LOCKED indicator light will switch off, indi-

cating that the door may be opened (wait approximately 3 minutes). Take out your laundry and leave the appliance door ajar

to make sure the drum dries completely. Switch the washing machine off by pressing the ON/OFF button.

Wash

Rinse

Spin

Pump out

End of wash cycle

END

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire

Hotpoint FML 602 EU Mode d'emploi Page 19

Commentaires sur ces manuels

Produits connexes et manuels pour Machines à laver Hotpoint FML 602 EU